Bedienungsanleitung Onkyo TX-NR808 (Seite 54 von 100) (Englisch)

645307

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

■ Noise Reduction

` Off:

Noise reduction off.

` Low

Low noise reduction.

` Mid:

Medium noise reduction.

` High:

High noise reduction.

With this setting, you can reduce noise appearing on the

screen.

Note

•If the “Game Mode” setting is set to “On” (➔ 53), this setting

is fixed at “Off”.

■ Brightness

*1*2

` –50 to 0 to +50

With this setting you can adjust the picture bright-

ness. “–50” is the darkest. “+50” is the brightest.

■ Contrast

*1*2

` –50 to 0 to +50

With this setting you can adjust contrast. “–50” is the

least. “+50” is the greatest.

■ Hue

*1*2

` –20 to 0 to +20

With this setting you can adjust the red/green bal-

ance. “–20” is the strongest green. “+20” is the

strongest red.

■ Saturation

*1*2

` –50 to 0 to +50

With this setting you can adjust saturation. “–50” is

the weakest color. “+50” is the strongest color.

Tip

This procedure can also be performed on the remote controller

by using the Home menu (➔ 26).

Press CLR if you want to reset to the default value.

You can assign a default listening mode to each input

source that will be selected automatically when you select

each input source. For example, you can set the default lis-

tening mode to be used with Dolby Digital input signals.

You can select other listening modes during playback, but

the mode specified here will be resumed once the AV

receiver has been set to Standby.

Main menu Listening Mode Preset

■ Analog/PCM

With this setting, you can specify the listening mode to

be used when an analog (CD, TV, LD, VHS, MD, turn-

table, radio, cassette, cable, satellite, etc.) or PCM digi-

tal (CD, DVD, etc.) audio signal is played.

■ Mono/Multiplex Source

With this setting, you can specify the listening mode to

be used when a mono digital audio signal is played

(DVD, etc.).

■ 2ch Source

With this setting, the default listening mode for 2-chan-

nel (2/0) stereo sources in a digital format, such as

Dolby Digital or DTS.

■ Dolby D/Dolby D +/TrueHD

With this setting, you can specify the listening mode to

be used when a Dolby Digital or Dolby Digital Plus for-

mat digital audio signal is played (DVD, etc.). Specifies

the default listening mode for Dolby TrueHD sources,

such as Blu-ray or HD DVD (input via HDMI).

Listening Mode Preset

Use q/w to select the input source that you want to

set, and then press ENTER.

The following menu appears.

For “TUNER” input selector only “Analog” will be

available. For “NET/USB” input source only “Digi-

tal” will be available.

Note

• If you connect an input component (such as UP-A1 series

Dock that seated iPod) to the UNIVERSAL PORT jack,

you can assign only listening modes for the analog sound

to “PORT” selector.

Use q/w to select the signal format that you want

to set, and then use e/r to select a listening mode.

Only listening modes that can be used with each

input signal format can be selected (➔ 36 to 40).

The “Last Valid” option means that the listening

mode selected last will be used.

1. BD/DVD

2. VCR/DVR

3. CBL/SAT

4. GAME

5. PC

6. AUX

5. Listening Mode Preset

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-NR808 Seite 54

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-NR808

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info