Bedienungsanleitung Onkyo TX-NR808 (Seite 57 von 100) (Englisch)

645307

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

• When the source equipment is connected with the u connec-

tion, it may malfunction if “HDMI Control (RIHD)” is set to

“On”.

■ Audio Return Channel

` Off:

Select “Off” if you don’t want to use audio return

channel (ARC) function.

` Auto

The audio signal from your TV tuner can be sent to

the HDMI OUT (North American and Taiwan

models)/HDMI OUT MAIN (European, Australian

and Asian models) of the AV receiver.

Audio return channel (ARC) function enables an HDMI

(Audio Return Channel) capable TV to send the audio

stream to the HDMI OUT (North American and Taiwan

models)/HDMI OUT MAIN (European, Australian and

Asian models) of the AV receiver. To use this function,

you must select the TV/CD input selector and your TV

must support ARC function.

Note

•The “Audio Return Channel” setting can be set only when the

“HDMI Control (RIHD)” setting is set to “On”.

• This setting is set to “Auto” automatically when the “HDMI

Control (RIHD)” is set to “On” first time.

■ Power Control

` Off:

Power Control disabled.

` On

Power Control enabled.

To link the power functions of p-compatible com-

ponents connected via HDMI, select “On”.

This setting is set to “On” automatically when the

“HDMI Control (RIHD)” is set to “On” first time.

Note

•The

“Power Control” setting can be set only when the “HDMI

Control (RIHD)

” setting is set to “On”.

• HDMI power control only works with p-compatible

components that support it and may not work properly with

some components due to their settings or compatibility.

• When set to “On”, power consumption will increase.

• When set to “On”, regardless of whether the AV receiver is On

or in Standby, both audio and video stream from an HDMI input

will be output to the TV or other components via HDMI connec-

tion (HDMI pass through function). When the HDMI pass

through function activates in standby mode, HDMI THRU indi-

cator will light.

• The power consumption during standby mode will increase dur-

ing the HDMI pass through function; however if your TV sup-

ports CEC (Consumer Electronics Control), the power

consumption can be saved in the following cases:

1. The TV is in standby mode.

2. You are watching a TV program.

• Refer to the connected component’s instruction manual for

details.

■ TV Control

` Off:

TV Control disabled.

` On

TV Control enabled.

Set to “On” when you want to control the AV receiver

from an p-compatible TV that is connected to

HDMI.

Note

• Do not assign the component connected with the HDMI input to

the TV/CD selector when you set “TV Control” setting to “On”.

Otherwise, appropriate CEC (Consumer Electronics Control)

operation is not guaranteed.

•Set to

“Off” when the TV is not compatible or when it is unclear

whether the TV is compatible or not.

•The

“TV Control” setting can be set only when the “HDMI

Control (RIHD)

” (➔ 56) and “Power Control” (➔ 57) set-

tings are both set to “On”.

• Refer to the connected component’s instruction manual for

details.

Auto Power Down

■ Auto Power Down

` Off:

Auto Power Down disabled.

` On:

Auto Power Down enabled.

The AV receiver will automatically perform STANDBY

operation when “Auto Power Down” is set to

“On”, with

no audio or video signal input, and if there is no operation

for 30 minutes.

“Auto Power Down” will display on the display and OSD

from 30 seconds before the Auto Power Down functions.

Default setting: On (European, Australian and Asian

models), Off (North American and Taiwan models)

Note

• Depending on some sources, the auto power-down function may

activate during playback.

• The Auto Power Down function does not work when Zone 2 or

Zone 3 is on.

Network

See “Network Settings” (➔ 67).

Firmware Update

Note

• Perform the firmware update only when an announcement is

posted on the Onkyo web site. See the Onkyo web site for latest

information.

• It takes about 30 minutes to complete the firmware update.

■ Version

The current version of the firmware is displayed.

After changing the settings of the “HDMI Control

(RIHD)”, “Audio Return Channel”, “Power Con-

trol”, or “TV Control”, turn off the power to all con-

nected pieces of equipment and then turn them on again.

Refer to the user’s manuals for all connected pieces of

equipment.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-NR808 Seite 57

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-NR808

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info