Bedienungsanleitung Onkyo TX-NR808 (Seite 92 von 100) (Englisch)

645307

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

■ The u functions don’t work

■ The functions System On/Auto Power On and

Direct Change don’t work for components

connected via u

■ When performing “Audyssey MultEQ

Room

Correction and Speaker Setup”, the

measurement fails showing the message

“Ambient noise is too high.”.

■ The following settings can be made for the

S-Video and composite video inputs

You must use the buttons on the unit to make these set-

tings.

1. While holding down the input selector button for the input

source that you want to set, press SETUP.

2. Use e/r to change the setting.

3. Press the input selector button for the input source that you

want to set when you’ve finished.

• Video Attenuation

This setting can be made for the BD/DVD, VCR/DVR,

CBL/SAT, GAME, or AUX input.

If you have a games console connected to the composite

video input, and the picture isn’t very clear, you can

attenuate the gain.

Video ATT:OFF: (default).

Video ATT:ON: Gain reduced by 2dB.

The AV receiver can upconvert component video, S-

Video, and composite video sources for display on a TV

connected to the HDMI output. However, if the picture

quality of the source is poor, upconversion may make the

picture worse or disappear altogether.

In this case, try the following:

Note

•If “Monitor Out” setting is set to “Analog”, press VCR/DVR

and RETURN on the AV receiver at the same time. Select

“Skip” in the “VideoProcessor” setting on the display. To reset

back to the original setting, press the same button at the same

time. If you select “Use”, the AV receiver will output video sig-

nals from the video processor.

To use u, you must make an u connection and an

analog audio connection (RCA) between the compo-

nent and AV receiver, even if they are connected dig-

itally.

These functions don’t work when Zone 2/3 is turned

on.

This can be caused by any malfunction in your

speaker unit. Check if the unit produces normal

sounds.

—

The AV receiver contains a microcomputer for signal

processing and control functions. In very rare situations,

severe interference, noise from an external source, or

static electricity may cause it to lockup. In the unlikely

event that this happens, unplug the power cord from the

wall outlet, wait at least five seconds, and then plug it

back in again.

Onkyo is not responsible for damages (such as CD

rental fees) due to unsuccessful recordings caused by

the unit’s malfunction. Before you record important

data, make sure that the material will be recorded cor-

rectly.

Before disconnecting the power cord from the wall out-

let, set the AV receiver to Standby.

Important Note Regarding Video Playback

If the video source is connected to a component

video input, connect your TV to the COMPO-

NENT VIDEO MONITOR OUT.

If the video source is connected to an S-Video input,

connect your TV to a MONITOR OUT S.

If the video source is connected to a composite video

input, connect your TV to MONITOR OUT V.

On the main menu, select “Input/Output Assign”,

and then select “HDMI Input”.

Select the relevant input selector, and assign it to

“-----” (➔ 43).

On the main menu, select “Input/Output Assign”,

and then select “Component Video Input” (➔ 44):

If the video source is connected to COMPO-

NENT VIDEO IN 1, select the relevant input

selector, and assign it to “IN1”.

If the video source is connected to COMPO-

NENT VIDEO IN 2, select the relevant input

selector, and assign it to “IN2”.

If the video source is connected to an S-Video

input or composite video input, select the relevant

input selector, and assign it to “-----”.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-NR808 Seite 92

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-NR808

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info