Bedienungsanleitung Onkyo TX-NR808 (Seite 91 von 100) (Englisch)

645307

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

■ Can’t learn commands from another remote

controller

■ Can’t record

■ There’s no sound

■ The Zone 2 speakers produce no sound

■ Can’t access the server or Internet radio

■ Playback stops while listening to music files on

the server

■ Can’t connect to the AV receiver from a Web

browser

■ Can’t access the music files on a USB device

■ Stand-by power consumption

■ The sound changes when I connect my

headphones

■ The speaker distance cannot be set as required

■ The display doesn’t work

■ How do I change the language of a multiplex

source

To control an Onkyo component that’s not connected

via u, point the remote controller at the compo-

nent. Be sure to enter the appropriate remote control

code first.

The entered remote control code may not be correct.

If more than one code is listed, try each one.

—

When learning commands, make sure that the trans-

mitting ends of both remote controllers are pointing

at each other.

—

Are you trying to learn from a remote controller that

cannot be used for learning? Some commands can-

not be learned, especially those that contain several

instructions.

—

Recording

On your recorder, make sure the correct input is

selected.

—

To prevent signal loops and damage to the AV

receiver, input signals are not fed through to outputs

with the same name (VCR/DVR IN to VCR/DVR

OUT).

—

When the Pure Audio listening mode is selected,

recording is not possible because no video signals

are output. Select another listening mode.

—

Zone 2/3

Only components connected to analog inputs can be

played in Zone 2/3.

—

Powered Zone 2 cannot be used if “Speakers

Type(Front)” is set to “Bi-Amp”.

To use the Zone 2 speakers, you must set the “Pow-

ered Zone2” setting to “Act”.

Music Server and Internet Radio

Check the network connection between the AV

receiver and your router or switch.

—

Make sure that your modem and router are properly

connected, and make sure they are both turned on.

—

Make sure the server is up and running and compati-

ble with the AV receiver.

65, 66

Check the “Network Settings”. 67

Make sure your server is compatible with the AV

receiver.

65, 66

If you download or copy large files on your com-

puter, playback may be interrupted. Try closing any

unused programs, use a more powerful computer, or

use a dedicated server.

—

If the server is serving large music files to several

networked devices simultaneously, the network may

become overloaded and playback may be inter-

rupted. Reduce the number of playback devices on

the network, upgrade your network, or use a switch

instead of a hub.

—

If you’re using DHCP, your router may not always

allocate the same IP address to the AV receiver, so if

you find that you can’t connect to a server or Internet

radio station, recheck the AV receiver’s IP address

on Network screen.

—

Check the “Network Settings”.

USB Mass Storage Device Playback

Make sure the USB device is plugged in properly. —

The AV receiver supports USB devices that support

the USB mass storage device class. However, play-

back may not be possible with some USB devices

even if they conform to the USB mass storage device

class.

—

USB memory devices with security functions cannot

be played.

—

Others

In the following cases, the power consumption could

reach a maximum of 55W:

1. You are using the Universal Port jack.

2. “Control” is set to “Enable” in the “Network”

setting.

3. “HDMI Control (RIHD)” setting is set to

“On”. (Depending on the TV status, the AV

receiver will enter Standby mode as usual.)

56, 68,

When a pair of headphones is connected, the listen-

ing mode is set to Stereo, unless it’s already set to

Stereo, Mono, Direct, or Pure Audio.

—

In some cases, corrected values suitable for home

theater use may be set automatically.

—

The display is turned off when the Pure Audio listen-

ing mode is selected.

—

Use the “Multiplex” setting on the “Audio Adjust”

menu to select “Main” or “Sub”.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-NR808 Seite 91

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-NR808

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info