Bedienungsanleitung Onkyo TX-NR828 (Seite 69 von 152) (Englisch)

527521

Zoom out

Zoom in

Vorherige Seite

1/152

Nächste Seite

Advanced Operations

En-69

Operating

procedure

(➔ page 60)

■ Dynamic EQ

` Off

` On:

Audyssey Dynamic EQ

becomes active.

The Dynamic EQ indicator will light.

With Audyssey Dynamic EQ, you can enjoy great

sound even when listening at low volume levels.

Audyssey Dynamic EQ solves the problem of

deteriorating sound quality as volume is decreased by

taking into account human perception and room

acoustics. It does so by selecting the correct

frequency response and surround volume levels

moment-by-moment so that the content sounds the

way it was created at any volume level — not just at

reference level.

■ Reference Level

Audyssey Dynamic EQ Reference Level Offset

` 0dB:

This should be selected for movie contents.

` 5dB:

Select this setting for content that has a very

wide dynamic range, such as classical music.

` 10dB:

Select this setting for jazz or other music that

has a wider dynamic range. This setting should

also be selected for TV content as that is usually

mixed at 10 dB below film reference.

` 15dB:

Select this setting for pop/rock music or other

program material that is mixed at very high

listening levels and has a compressed dynamic

range.

Movies are mixed in rooms calibrated for film

reference. To achieve the same reference level in a

home theater system each speaker level must be

adjusted so that –30 dBFS band-limited (500 Hz to

2000 Hz) pink noise produces 75 dB sound pressure

level at the listening position. A home theater system

automatically calibrated by Audyssey MultEQ

will

play at reference level when the master volume

control is set to the 0 dB position. At that level you

can hear the mix as the mixers heard it.

Audyssey Dynamic EQ is referenced to the standard

film mix level. It makes adjustments to maintain the

reference response and surround envelopment when

the volume is turned down from 0 dB. However, film

reference level is not always used in music or other

non-film content. Audyssey Dynamic EQ Reference

Level Offset provides three offsets from the film level

reference (5 dB, 10 dB, and 15 dB) that can be

selected when the mix level of the content is not

within the standard.

Note

• If “Dynamic EQ” setting is set to “Off”, this technology

cannot be used.

■ Dynamic Volume

` Off

` Light:

Activates Light Compression Mode.

` Medium:

Activates Medium Compression Mode.

` Heavy:

Activates Heavy Compression Mode. This

setting affects volume the most. It quiets the

loud parts, such as explosions, and boosts the

quiet parts so they can be heard.

Note

• If you want to use Audyssey Dynamic EQ or

Audyssey Dynamic Volume

with THX listening modes, set

the “Loudness Plus” setting to “Off” and set “Preserve

THX Settings” to “No” (➔ page 66).

• If you make Dynamic Volume active, “Dynamic EQ” is set

to “On”. The Dynamic Vol indicator will light.

• When “Dynamic EQ” is set to “Off”, “Dynamic Volume” is

automatically switched to “Off”.

About Audyssey Dynamic EQ

Audyssey Dynamic EQ solves the problem of

deteriorating sound quality as volume is decreased by

taking into account human perception and room

acoustics. Dynamic EQ selects the correct frequency

response and surround levels moment-by-moment at

any user-selected volume setting. The result is bass

response, tonal balance and surround impression

that remain constant despite changes in volume.

Dynamic EQ combines information from incoming

source levels with actual output sound levels in the

room, a prerequisite for delivering a loudness

correction solution. Audyssey Dynamic EQ works in

tandem with Audyssey MultEQ to provide well-

balanced sound for every listener at any volume level.

About Audyssey Dynamic Volume

Audyssey Dynamic Volume solves the problem of

large variations in volume level between television

programs, commercials, and between the soft and

loud passages of movies. Dynamic Volume looks at

the preferred volume setting by the user and then

monitors how the volume of program material is being

perceived by listeners in real time to decide whether

an adjustment is needed. Whenever necessary,

Dynamic Volume makes the necessary rapid or

gradual adjustments to maintain the desired playback

volume level while optimizing the dynamic range.

Audyssey Dynamic EQ is integrated into

Dynamic Volume so that as the playback volume is

adjusted automatically, the perceived bass response,

tonal balance, surround impression and dialog clarity

remain the same whether watching movies, flipping

between television channels or changing from stereo

to surround sound content.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-NR828 Seite 69

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-NR828

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info