Bedienungsanleitung Onkyo TX-NR828 (Seite 70 von 152) (Englisch)

527521

Zoom out

Zoom in

Vorherige Seite

1/152

Nächste Seite

Advanced Operations

En-70

Operating

procedure

(➔ page 60)

IntelliVolume

■ IntelliVolume

` –12dB to 0dB

to +12dB in 1 dB steps

With IntelliVolume, you can set the input level for

each input selector individually. This is useful if one of

your source components is louder or quieter than the

others.

Use e/r to set the level.

If a component is noticeably louder than the others,

use e to reduce its input level. If it’s noticeably

quieter, use r to increase its input level.

Note

• IntelliVolume does not work for Zone 2/3.

A/V Sync

■ A/V Sync

` 0msec

to 800msec in 5 msec steps

When using progressive scanning on your Blu-ray

Disc/DVD player, you may find that the picture and

sound are out of sync. With this setting, you can

correct this by delaying the audio signals.

Press ENTER to view the TV picture while setting the

delay when the video source is output to HDMI OUT

MAIN.

To return to the previous screen, press RETURN.

The range of values you can adjust will depend on

whether your TV or display supports HDMI Lip Sync

and if the “Lip Sync” setting is set to “On” or not

(➔ page 76).

Note

• This setting is not available in either of the following cases:

– The “Audio TV Out (Main)” setting is set to “On”

(➔ page 75) or “Audio TV Out (Sub)” setting is set to

“On” (➔ page 75) and you’re listening through your TV

speakers.

–“HDMI CEC (RIHD)” is set to “On” (➔ page 74) and

you’re listening through your TV speakers.

• A/V Sync is disabled when the Pure Audio or Direct

listening mode is used with an analog input source.

• This setting cannot be used with the NET, USB and

BLUETOOTH input selectors.

Name Edit

You can enter a custom name for each individual

input selector and radio preset for easy identification.

When entered, the custom name will appear on the

display.

The custom name is edited using the keyboard

screen.

■ Name

a Toggles between lower and upper case

characters.

b Moves the cursor left or right in the Name input

area.

c Moves the cursor backward and deletes one

character.

d Enters a space character.

e Confirms your entry.

Tip

• To name a radio preset, use TUNER to select AM or FM,

and then select the preset (➔ page 41).

• To restore a name to its default, erase all characters with

CLR, select “OK” and then press ENTER.

This can also be performed by using +10 on the remote

controller.

Press CLR on the remote controller to delete all the

characters you have input.

Note

• This setting cannot be used for the NET, USB and

BLUETOOTH input selectors.

Use q/w/e/r to select a character, and then

press ENTER.

Repeat this step to enter up to 10 characters.

To store a name when you’re done, be sure to

select “OK” by using q/w/e/r, and then press

ENTER.

BD/DVD

4 - 4. Name Edit

Name

+10 CLR

abcde fgh i j k lm

nopqr s t uvwxyz

1234567890–^\

Space

Back Space

Shift OK

,./;:@[]

Shift All Erase

ABCDEFGH I JKLM

NOPQRS TUVWXYZ

`{}<>

!˝#$%&’

)(_=|˜

Shift All Erase

+10 CLR

Space

Back Space

Shift OK

aebdc

Name input area

*1 *2

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-NR828 Seite 70

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-NR828

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info