Bedienungsanleitung Onkyo TX-NR828 (Seite 72 von 152) (Englisch)

527521

Zoom out

Zoom in

Vorherige Seite

1/152

Nächste Seite

Advanced Operations

En-72

Operating

procedure

(➔ page 60)

■ Hue

*1*2*4

` –50 to 0 to +50

With this setting, you can adjust the color hue

between “–50” and “+50”.

■ Saturation

*1*2*4

` –50 to 0 to +50

With this setting, you can adjust saturation. “–50” is

the weakest color. “+50” is the strongest color.

■ Color Temperature

*2*4

` Warm

` Normal

` Cool

With this setting, you can adjust the color

temperature.

Note

•“Picture Adjust”

cannot be used when:

– The NET, USB or BLUETOOTH input selector is

selected, or

–“Monitor Out” is set to “Sub”.

This procedure can also be performed on the remote

controller by using the Quick Setup (➔ page 56).

When the “Picture Mode” setting is set to anything other

than “Custom”, this setting cannot be used.

If the “Resolution” setting is set to “4K” (➔ page 61),

this setting is fixed at “Off”.

Press CLR if you want to reset to the default value.

If the “Game Mode” setting is set to “On”, this setting is

fixed at “Off”.

When a 3D video source is input, “Wide Mode” is fixed to

“Full”.

Audio Selector

■ Audio Selector

` ARC:

The audio signal from your TV tuner can be sent

to HDMI OUT MAIN of the AV receiver.

With this selection, the TV’s audio can be

automatically selected as a priority among other

assignments.

` HDMI:

This can be selected when HDMI IN has been

assigned as an input source. If both HDMI

(HDMI IN) and digital audio inputs (COAXIAL IN

or OPTICAL IN) have been assigned, HDMI

input is automatically selected as a priority.

` COAXIAL:

This can be selected when COAXIAL IN has

been assigned as an input source. If both

coaxial and HDMI inputs have been assigned,

coaxial input is automatically selected as a

priority.

` OPTICAL:

This can be selected when OPTICAL IN has

been assigned as an input source. If both optical

and HDMI inputs have been assigned, optical

input is automatically selected as a priority.

` Analog:

The AV receiver always outputs analog signals.

You can set priorities of audio output when there are

both digital and analog inputs.

Note

• This setting can be made only for an input source that is

assigned to HDMI IN, COAXIAL IN, or OPTICAL IN.

• This setting cannot be used with the NET, USB and

BLUETOOTH input selectors.

• When using the Whole House Mode, “Audio Selector” is

fixed to “Analog”.

You can select “ARC” if you select the TV/CD input

selector. But you cannot if you’ve selected “Off” in the

“Audio Return Channel” setting (➔ page 76).

Setting the Incoming Digital Signal (Fixed

Mode)

■ Fixed Mode

` Off

The format is detected automatically. If no digital

input signal is present, the corresponding analog

input is used instead.

` PCM:

Only 2-channel PCM format input signals will be

heard. If the input signal is not PCM, the PCM

indicator will flash and noise may also be

produced.

` DTS:

Only DTS (but not DTS-HD) format input signals

will be heard. If the input signal is not DTS, the

dts indicator will flash and there will be no

sound.

When “HDMI”, “COAXIAL” or “OPTICAL” is selected

in the “Audio Selector” setting, you can then specify

the signal type in “Fixed Mode”.

Normally, the AV receiver detects the signal format

automatically. However, if you experience either of

the following issues when playing PCM or DTS

material, you can manually set the signal format to

PCM or DTS.

• If the beginnings of tracks from a PCM source are

cut off, try setting the format to PCM.

• If noise is produced when fast forwarding or

reversing a DTS CD, try setting the format to DTS.

Note

• The setting will be reset to “Off” when you change the

setting in “Audio Selector”.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-NR828 Seite 72

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-NR828

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info