Bedienungsanleitung Onkyo TX-NR828 (Seite 73 von 152) (Englisch)

527521

Zoom out

Zoom in

Vorherige Seite

1/152

Nächste Seite

Advanced Operations

En-73

Operating

procedure

(➔ page 60)

You can assign a default listening mode to each input

source that will be selected automatically when you

select each input source. For example, you can set

the default listening mode to be used with Dolby

Digital input signals. You can select other listening

modes during playback, but the mode specified here

will be resumed once the AV receiver has been set to

standby.

■ Analog/PCM/Digital

With this setting, you can specify the listening mode

used when an analog (CD, TV, LD, VHS, MD,

turntable, radio, cassette, cable, satellite, etc.) or

PCM digital (CD, DVD, etc.) audio signal is played.

Note

• For the “GAME2” input selector, only “PCM” is available.

■ Mono/Multiplex Source

With this setting, you can specify the listening mode

used when a mono digital audio signal is played

(DVD, etc.).

■ 2ch Source

With this setting, you can specify the listening mode

used when 2-channel (2/0) stereo digital sources,

such as Dolby Digital or DTS, are played.

■ Dolby D/Dolby D Plus/TrueHD

With this setting, you can specify the listening mode

used when Dolby Digital or Dolby Digital Plus format

digital audio signals are played (DVD, etc.). Specifies

the default listening mode for Dolby TrueHD sources,

such as Blu-ray or HD DVD (input via HDMI).

■ DTS/DTS-ES/DTS-HD

With this setting, you can specify the listening mode

used when DTS or DTS-HD High Resolution format

digital audio signals are played (DVD, LD, CD, etc.).

Specifies the default listening mode for DTS-HD

Master Audio sources, such as Blu-ray or HD DVD

(input via HDMI).

■ Other Multich Source

Specifies the default listening mode for multichannel

PCM sources from HDMI IN such as DVD-Audio, and

DSD multichannel sources such as Super Audio CD.

Volume Setup

■ Volume Display

` Absolute

Displayed range is Min, 0.5 to 99.5, Max.

` Relative (THX):

Displayed range is –QdB, –81.5dB to +18.0dB.

With this setting, you can choose how the volume level

is displayed.

The absolute value 82 is equivalent to the relative

value 0 dB.

Note

• If the absolute value is set to 82, “82.0Ref” will appear on

the display and the THX indicator will flash.

■ Muting Level

` –

QdB (fully muted), –50dB to –10dB in 10 dB

steps.

This setting determines how much the output is muted

when the muting function is used (➔ page 53).

■ Maximum Volume

` Off

, 50 to 99 (Absolute display)

` Off

, –32dB to +17dB (Relative display)

With this setting, you can limit the maximum volume.

To disable this setting, select “Off”.

■ Power On Volume

` Last

, Min, 1 to 99 or Max (Absolute display)

` Last

, –QdB, –81dB to +18dB (Relative display)

With this preference, you can specify the volume

setting to be used each time the AV receiver is turned

on.

To use the same volume level that was used when

the AV receiver was turned off, select “Last”.

The “Power On Volume” setting cannot be set higher

than the “Maximum Volume” setting.

5. Listening Mode Preset

Use q/w to select the input source that you

want to set, and then press ENTER.

The following menu appears.

Use q/w to select the signal format that you

want to set, and then use e/r to select a

listening mode.

Only listening modes that can be used with each

input signal format can be selected (➔ pages 44

to 51).

The “Last Valid” option means that the listening

mode selected last will be used.

The “Straight Decode” option means that

straight decoding listening mode (Dolby Digital,

DTS, etc.) is selected.

Note

• For the “TUNER” input selector, only “Analog” will be

available.

• For the “NET” or “USB” input selector, “Digital” and

“TrueHD” will be available.

Default listening mode for analog and PCM sources.

Analog/PCM

Mono/Multiplex Source

2ch Source

Dolby D/Dolby D Plus/TrueHD

DTS/DTS-ES/DTS-HD

Other Multich Source

Last Valid e r

5-1. Listening Mode Preset

BD/DVD

Last Valid

• For the “BLUETOOTH” input selector, only “Digital”

is available.

6. Miscellaneous

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-NR828 Seite 73

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-NR828

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info