Bedienungsanleitung Onkyo TX-NR828 (Seite 75 von 152) (Englisch)

527521

Zoom out

Zoom in

Vorherige Seite

1/152

Nächste Seite

Advanced Operations

En-75

Operating

procedure

(➔ page 60)

■ HDMI Through

` Off

` BD/DVD, CBL/SAT, STB/DVR, GAME1, GAME2,

PC, AUX, TV/CD, PHONO:

Selects the input source for which the HDMI

Through function is enabled.

` Last:

The HDMI Through function is activated on the

input source selected at the time of setting the

AV receiver to standby mode.

When enabling the HDMI Through function,

regardless of whether the AV receiver is on or in

standby, both audio and video streams from an HDMI

input will be output to the TV or other components via

HDMI connection. The HDMI indicator will be dimly-lit

in standby mode. Note that the indicator may not light

under certain conditions (➔ page 25).

This setting is fixed to “Auto” automatically when the

above “HDMI CEC (RIHD)” setting is set to “On”,

resulting in automatic input source selection.

Note

• Only an input source assigned to an HDMI IN via

“HDMI Input” setting is enabled (➔ page 62).

• The power consumption in standby mode will increase

during the HDMI Through function; however in the following

cases, the power consumption can be saved:

– The TV is in standby mode.

– You are watching a TV program.

• Refer to the connected component’s instruction manual for

details.

• Depending on the connected component, the correct input

source may not be selected with the setting fixed to “Auto”.

• This setting is set to “Off” automatically when the “HDMI

CEC (RIHD)” setting is set to “Off”.

• This function is only available for the HDMI OUT MAIN jack.

■ Audio TV Out (Main)

` Off

` On

This preference determines whether the incoming

audio signal is output from HDMI OUT MAIN. You

may want to turn this preference on if your TV is

connected to HDMI OUT MAIN and you want to listen

to the audio from a connected component through

your TV’s speakers. Normally, this should be set to

“Off”.

Note

• If “On” is selected and the audio can be output from the TV,

the AV receiver will output no sound through its speakers.

In this case, “TV Speaker” appears on the AV receiver’s

display by pressing DISPLAY.

• When “HDMI CEC (RIHD)” is set to “On”, this setting is

fixed to “Auto”.

• This setting is fixed to “Off” when “Monitor Out” is set to

“Sub” (➔ page 61).

• With some TVs and input signals, no sound may be output

even when this setting is set to “On”.

• When “Audio TV Out (Main)” or

“HDMI CEC (RIHD)” is set

“On” and you’re listening through your TV’s speakers,

turning up the AV receiver’s volume control will make the

sound be output from the AV receiver’s front left and right

speakers. To stop the AV receiver’s speakers producing

sound, change the settings, change your TV’s settings, or

turn down the AV receiver’s volume.

• Listening mode cannot be changed when this setting is set

to “On” and the audio is output from the TV.

• If the audio signal from the player is not supported by the

TV, the audio is not output from the TV even if this setting

is enabled. When the audio cannot be output from the TV,

(When “Monitor Out” is set to “Both”, the audio cannot be

output form the TV connected to both HDMI OUT MAIN and

HDMI OUT SUB) the audio is output from the speakers

connected to the AV receiver.

■ Audio TV Out (Sub)

` Off

` On

This preference determines whether the incoming

audio signal is output from HDMI OUT SUB. You may

want to turn this preference on if your TV is

connected to HDMI OUT SUB and you want to listen

to the audio from a connected component through

your TV’s speakers. Normally, this should be set to

“Off”.

Note

• If “On” is selected and the audio can be output from the TV,

the AV receiver will output no sound through its speakers.

In this case, “TV Speaker” appears on the AV receiver’s

display by pressing DISPLAY.

• This setting is fixed to “Off” when “Monitor Out” is set to

“Main” (➔ page 61).

• When “Monitor Out” is set to “Both” (➔ page 61), and this

setting is enabled, set audio output of source component to

2ch PCM.

• With some TVs and input signals, no sound may be output

even when this setting is set to “On”.

• When “Audio TV Out (Sub)” is set to

“On” and you’re

listening through your TV’s speakers, turning up the AV

receiver’s volume control will make the sound be output

from the AV receiver’s front left and right speakers. To stop

the AV receiver’s speakers producing sound, change the

settings, change your TV’s settings, or turn down the AV

receiver’s volume.

• Listening mode cannot be changed when this setting is set

to “On” and the audio is output from the TV.

• When “Monitor Out” is set to “Both” (➔ page 61) and only

“Audio TV Out (Sub)” is set to “On”, the audio is not output

from the TV connected to HDMI OUT SUB except in the

case the audio input is via HDMI.

• If the audio signal from the player is not supported by the

TV, the audio is not output from the TV even if this setting

is enabled. When the audio cannot be output from the TV,

(When “Monitor Out” is set to “Both”, the audio cannot be

output form the TV connected to both HDMI OUT MAIN and

HDMI OUT SUB) the audio is output from the speakers

connected to the AV receiver.

Onkyo TX-NR828 Seite 75

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-NR828

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info