Bedienungsanleitung Onkyo TX-NR828 (Seite 91 von 152) (Englisch)

527521

Zoom out

Zoom in

Vorherige Seite

1/152

Nächste Seite

En-91

Appendix

Troubleshooting

If you have any trouble using the AV receiver, look for

a solution in this section. If you can’t resolve the issue

yourself, contact your Onkyo dealer.

If you can’t resolve the issue yourself, try resetting the

AV receiver before contacting your Onkyo dealer.

To reset the AV receiver to its factory defaults, turn it

on and, while holding down CBL/SAT, press

8ON/STANDBY. “Clear” will appear on the AV

receiver’s display and the AV receiver will enter

standby mode.

Note that resetting the AV receiver will delete your

radio presets and custom settings.

To reset the remote controller to its factory defaults,

while holding down RECEIVER, press and hold down

HOME until RECEIVER lights (about 3 seconds).

Within 30 seconds, press RECEIVER again.

The on-screen information appears only on a TV that

is connected to HDMI outputs.

■ Can’t turn on the AV receiver

■ The AV receiver turns off unexpectedly

■ The AV receiver turns off and after restoring the

power, it turns off again

■ There’s no sound, or it’s very quiet

Resetting the AV receiver

HOME

RECEIVER

Power

Make sure that the power cord is properly plugged into the

wall outlet.

Unplug the power cord from the wall outlet, wait five

seconds or more, then plug it in again.

The AV receiver will automatically enter standby mode

when Auto Standby has been set and launches.

(➔ page 76)

The protection circuit has been activated. Remove the

power cord from the wall outlet immediately. Make sure

that all speaker cables and input sources are properly

connected, and leave the AV receiver with its power cord

disconnected for 1 hour. After that, reconnect the power

cord and turn the power on. If the AV receiver turns off

again, avoid resetting it and unplug the power cord. Then

contact your Onkyo dealer. (➔ page 16)

Caution:

• If “CHECK SP WIRE” appears on the AV receiver’s

display, the speaker cables may be shorting.

WARNING:

• If smoke, smell or abnormal noise is produced by the AV

receiver, unplug the power cord from the wall outlet

immediately and contact your Onkyo dealer.

Audio

Make sure that the digital input source is selected properly.

(➔ page 63)

Make sure that all audio connecting plugs are pushed in all

the way (➔ page 18).

Make sure that the inputs and outputs of all components

are connected properly. (➔ pages 18 to 23)

Make sure that the polarity of the speaker cables is correct,

and that the bare wires are in contact with the metal part of

each speaker terminal. (➔ page 16)

Make sure that the input source is properly selected.

(➔ page 32)

Make sure that the speaker cables are not shorting.

(➔ page 16)

Check the volume. The AV receiver is designed for home

theater enjoyment. It has a wide volume range, allowing

precise adjustment.

If the MUTING indicator is flashing on the AV receiver’s

display, press the remote controller’s MUTING button to

unmute the AV receiver. (➔ page 53)

While a pair of headphones is connected to the PHONES

jack, no sound is output from the speakers. (➔ page 23)

If there’s no sound from a DVD player connected to an

HDMI IN, check the DVD player’s output settings, and be

sure to select a supported audio format.

Check the digital audio output setting on the connected

device. On some game consoles, such as those that

support DVD, the default setting is off.

With some DVD-Video discs, you need to select an audio

output format from a menu.

If your turntable uses an MC cartridge, you must connect

an MC head amp, or an MC transformer.

Make sure that none of the connecting cables are bent,

twisted, or damaged.

Not all listening modes use all speakers. (➔ page 44)

Specify the speaker distances and adjust the individual

speaker levels. (➔ page 65)

Make sure that the speaker setup microphone is not still

connected.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-NR828 Seite 91

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-NR828

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info