62439
67
Zoom out
Zoom in
Vorherige Seite
1/150
Nächste Seite
67
First Time Setup—Continued
Notes:
When the automatic speaker setup is complete, the
“Equalizer Settings” (page 102) will be set to
Audys-
sey
.
You can cancel the automatic speaker setup at any
point in the procedure simply by disconnecting the
setup microphone.
6
When prompted, place the setup
microphone at the next position,
and repeat step 5.
7
After the 3rd or 7th measure-
ment, the following screen
appears.
Use the Up and Down [q]/[w] but-
tons to select an option, and then
press [ENTER].
Next:
Select “Next” to begin measuring
the next measurement position.
After the 8th measurement has been
taken, the procedure automatically
proceeds to step 8.
Finish(Calculate):
Select this if you don’t want to
measure any more listening posi-
tions and are ready to calculate the
results, then go to step 8.
8
When the measurements are
complete, the following screen
appears.
9
When the calculations are com-
plete, the following screen
appears.
Auto Speaker Setup
Select [Next] to measure the next position, or select
[Finish] to calculate the Audyssey MultEQ room EQ
solution.
Next
Finish(Calculate )
ENTER
ENTER
MOVE
Calculating...
Auto Speaker Setup
Auto Speaker Setup
Save
Review SP Config
Review SP Distance
Review SP Level
Cancel
ENTER
ENTER
MOVE
Use the Up and Down [q]/[w] but-
tons to select an option, and then
press [ENTER].
Save:
Save the calculated settings and exit
the automatic speaker setup.
Review SP Config:
Review the speaker configuration
settings (see “Reviewing the
Results” on page 69).
Review SP Distance:
Review the speaker distance set-
tings (see “Reviewing the Results”
on page 69).
Review SP Level:
Review the speaker level settings
(see “Reviewing the Results” on
page 69).
Cancel:
Cancel the automatic speaker setup.
10
If you selected “Save”, the results are
saved, and the following screen
appears.
11
Disconnect the setup MIC.
Auto Speaker Setup
Saving...
Auto Speaker Setup
Please, unplug Setup Mic.
67

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Onkyo TX-NR906 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Onkyo TX-NR906

Onkyo TX-NR906 Bedienungsanleitung - Deutsch - 294 seiten

Onkyo TX-NR906 Bedienungsanleitung - Holländisch - 294 seiten

Onkyo TX-NR906 Bedienungsanleitung - Italienisch - 294 seiten

Onkyo TX-NR906 Bedienungsanleitung - Schwedisch - 294 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info