Bedienungsanleitung Onkyo TX-NR906 (Seite 116 von 150) (Englisch)

62439

116

Zoom out

Zoom in

Vorherige Seite

1/150

Nächste Seite

116

Advanced Setup—Continued

■ Power On Volume

This setting determines what the volume will be each

time the AV receiver is turned on.

When the “Volume Display” preference is set to “Abso-

lute”, the range is “Last”, “Min”, 1 to “Max”. When it’s

set to “Relative”, the range is “Last”, –∞ dB, –81 dB to

+18 dB.

To use the same volume level as when the AV receiver

was last turned off, select “Last”.

Note:

The “Power On Volume” setting cannot be set higher

than the “Maximum Volume” setting.

■ Headphone Level

With this setting, you can offset the headphone volume

relative to the main volume. This is useful if your head-

phones are too loud or too quiet at the volume setting you

usually use when listening through your speakers. The

headphone level can be set from –12 dB to +12 dB.

■ Zone2 Maximum Volume

With this setting, you can limit the maximum volume for

Zone 2.

When the “Volume Display” setting is set to “Absolute”,

the “Maximum Volume” range is “Off”, 99 to 50. When

it’s set to “Relative”, the range is “Off”, +17 dB to

–32 dB. To disable this setting, select “Off”.

■ Zone2 Power On Volume

This setting determines what the volume will be for

Zone 2 each time the AV receiver is turned on.

When the “Volume Display” preference is set to “Abso-

lute”, the range is “Last”, “Min”, 1 to “Max”. When it’s

set to “Relative”, the range is “Last”, –

∞ dB, –81 dB to

+18 dB.

To use the same volume level as when the AV receiver

was last turned off, select “Last”.

■ Zone3 Maximum Volume

With this setting, you can limit the maximum volume for

Zone 3.

When the “Volume Display” setting is set to “Absolute”,

the “Maximum Volume” range is “Off”, 99 to 50. When

it’s set to “Relative”, the range is “Off”, +17 dB to

–32 dB. To disable this setting, select “Off”.

■ Zone3 Power On Volume

This setting determines what the volume will be for

Zone 3 each time the AV receiver is turned on.

When the “Volume Display” preference is set to “Abso-

lute”, the range is “Last”, “Min”, 1 to “Max”. When it’s

set to “Relative”, the range is “Last”, –

∞ dB, –81 dB to

+18 dB.

To use the same volume level as when the AV receiver

was last turned off, select “Last”.

OSD Setup

■ Immediate Display

This setting determines whether operation details are

displayed onscreen immediately after an AV receiver

function is used.

On: Displayed (default).

Off: Not displayed.

Even when “On” is selected, operation details may not

be output if the input source is connected to a COMPO-

NENT VIDEO IN or HDMI IN.

For optimal video performance, THX recommends that

“Immediate Display” be turned off.

■ Monitor Type

With this setting, you can specify the aspect ratio of your

TV so that menus are displayed properly.

4:3: Select if your TV is 4:3.

16:9: Select if your TV is 16:9 (default).

■ Display Position

This setting determines where on the screen operation

details are displayed.

Bottom: Bottom of the screen (default).

Top : Top of the screen.

■ TV Format (not North American models)

See “TV Format Setup (not North American models)”

on page 62.

■ Language

This setting determines the language used for the

onscreen setup menus. You can select: English, German,

French, Spanish, Italian, Dutch, Swedish, or Japanese.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-NR906 Seite 116

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-NR906

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info