Bedienungsanleitung Onkyo TX-NR906 (Seite 118 von 150) (Englisch)

62439

118

Zoom out

Zoom in

Vorherige Seite

1/150

Nächste Seite

118

Advanced Setup—Continued

Tuner

■ AM Freq Step (on some models)

See “AM Frequency Step Setup (on some models)” on

page 63.

■ Satellite Radio (on North American model)

If you connect an XM Satellite Radio antenna or SIRIUS

Satellite Radio antenna to the AV receiver (both sold

separately), set this setting to XM or SIRIUS respec-

tively. If you connect both types of antenna, select

XM/SIRIUS. Otherwise, select None. See the separate

Satellite Radio Guide for more information.

Analog Multich

■ Subwoofer Input Sensitivity

Some DVD players output the LFE channel from their

analog subwoofer output at 15 dB higher than normal.

With this setting, you can change the AV receiver’s sub-

woofer sensitivity to match your DVD player. Note that

this setting only affects signals connected to the AV

receiver’s MULTI CH: SUBWOOFER jack.

You can select 0 dB, 5 dB, 10 dB, or 15 dB.

If you find that your subwoofer is too loud, try the 10 dB

or 15 dB setting.

HDMI

■ Audio TV Out

This setting determines whether audio received by an

HDMI input is output by the HDMI outputs. You may

want to change this setting to “On” if your TV is con-

nected to an HDMI output and you want to listen to

audio from an HDMI component through your TV’s

speakers. Normally, it should be set to “Off”.

Off: HDMI audio is not output (default).

On: HDMI audio is output.

Notes:

• If “On” is selected and the signal can be output by the

TV, the AV receiver will output no sound through its

speakers.

• When “TV Control” is enabled, this setting is set to

“Auto”.

• With some TVs and input signals, no sound may be

output even if “On” is selected.

• When the “Audio TV Out” setting is set to “On”, or

“TV Control” is set to “Enable” and you’re listening

through your TV’s speakers (see page 43), if you turn

up the AV receiver’s volume control, the sound will be

output by the AV receiver’s speakers. To stop the AV

receiver’s speakers producing sound, change the set-

tings, change your TV’s settings, or turn down the AV

receiver’s volume.

■ Lip Sync

The Lip Sync function can automatically synchronize

HDMI audio and video that’s gotten out of sync due to

the complex digital video processing being performed by

your HDMI-compatible TV. With HDMI Lip Sync, the

audio delay required to synchronize the audio and video

is calculated and applied automatically by the AV

receiver.

Disable: HDMI lip sync disabled (default).

Enable: HDMI lip sync enabled.

Notes:

• This function works only if your HDMI-compatible

TV supports HDMI Lip Sync.

• You can check the amount of delay being applied by

the HDMI Lip Sync function on the “A/V Sync”

screen (see page 110).

■ x.v.Color

If your HDMI source and HDMI-compatible TV both

support the “x.v.Color”, you can enable “x.v.Color” on

the AV receiver with this setting.

Disable: “x.v.Color” disabled (default).

Enable: “x.v.Color” enabled.

Notes:

• If the color is unnatural when “x.v.Color” is set to

“Enable”, change the setting to

“Disable”.

• Refer to the connected component’s instruction man-

ual for details.

■ Control

This function allows -compatible components

connected via HDMI to be controlled with the AV

receiver.

Notes:

• , which stands for Remote Interactive over

HDMI, is the name of the system control function

found on Onkyo components. The AV receiver can be

used with CEC (Consumer Electronics Control),

which allows system control over HDMI and is part of

the HDMI standard. CEC provides interoperability

between various components, however, operation with

components other than -compatible compo-

nents cannot be guaranteed.

•Set to

“Disable” when a connected piece of equipment

is not compatible or it is unclear whether the equip-

ment is compatible or not.

• If movement is unnatural when set to

“Enable”, change

the setting to

“Disable”.

• Refer to the connected component’s instruction man-

ual for details.

Disable: disabled (default).

Enable: enabled.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-NR906 Seite 118

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-NR906

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info