Bedienungsanleitung Onkyo TX-NR906 (Seite 128 von 150) (Englisch)

62439

128

Zoom out

Zoom in

Vorherige Seite

1/150

Nächste Seite

128

NET/USB (TX-NR906 only)—Continued

Once you’ve added a station to the list, simply select it

on the Internet Radio screen, and then press [ENTER] to

start playback.

Notes:

• When you try the connection after the user preset, if

“[?]” is displayed in the list, URL may be entered

incorrectly. Check the URL again.

• Even if the entered URL is improper (not the applica-

ble playlist format), some contents may be displayed.

In that case, [?] is displayed.

• When connected to an Internet radio station that uses

the MP3 streaming format, the MP3 indicator lights

up. When connected to an Internet radio station that

uses the WMA streaming format, the WMA indicator

lights up.

• If you’re using a narrowband Internet connection (e.g.,

56K modem or ISDN), depending on the station,

Internet radio may not work satisfactorily. For best

results, use a broadband connection (e.g., cable

modem, xDSL modem, etc).

Note:

When modifying network settings, after modifying it is

necessary to execute Save Settings.

This section explains how to configure the AV receiver’s

network settings manually.

If your router’s DHCP server is enabled, you don’t need

to change any of these settings, as the AV receiver is set

use DHCP to configure itself automatically by default

(i.e., DHCP is set to Enable). If, however, your router’s

DHCP server is disabled, for example, you’re using

static IP addresses, you’ll need to configure these set-

tings yourself, in which case, a knowledge of Ethernet

networking is essential.

What’s DHCP?

DHCP (Dynamic Host Configuration Protocol) is used

by routers, computers, the AV receiver, and other devices

to automatically configure themselves on a network.

What’s DNS?

The DNS (Domain Name System) translates domain

names into IP addresses. For example, when you enter a

domain name such as www.onkyousa.com in your Web

browser, before accessing the site, your browser uses

DNS to translate this into an IP address, in this case

63.148.251.142.

Press [ENTER].

The station’s programs are displayed.

Use the Up and Down [q]/[w] but-

tons to select a program, and

then press [ENTER].

Playback starts and the following

screen appears.

Refer to page 121 for the Internet

Radio.

RETURN

PLAY

iRadio station name

1 / 11

- - -

Streaming program name

MP3 128kbps 16bit/44.1kHz

Network Settings

Press the [RECEIVER] REMOTE

MODE button, followed by the

[SETUP] button.

The main menu appears onscreen.

Use the Up and Down [q]/[w] but-

tons to select “7. Hardware

Setup”, and then press [ENTER].

The “Hardware Setup” menu appears.

7. Hardware Setup

1. Remote Control

2. Zone2/Zone3

3. Tuner

4. Analog Multich

5. HDMI

6. Network

MOVE ENTER RETURN

ENTER

RETURN

EXIT

SETUP

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-NR906 Seite 128

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-NR906

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info