Bedienungsanleitung Onkyo TX-NR929 (Seite 26 von 160) (Englisch)

517568

Zoom out

Zoom in

Vorherige Seite

1/160

Nächste Seite

Turning On & Basic Operations

En-26

When a new version of the firmware is available, the

notification window “AV receiver : Firmware Update

Available” pops up. This notification only appears

when the AV receiver is connected to the Internet

(➔ pages 20, 31). To perform the firmware update,

follow the instructions on screen.

Use q/w and ENTER on the AV receiver or remote

controller to select one of the options.

` Update Now:

Starts the firmware update.

Refer to “Firmware Update” (➔ page 104).

` Remind me Later:

The update notification will pop up again the

next time you turn the AV receiver on.

` Never Remind me:

Disables the automatic update notification.

Tip

• The update notification window can be enabled or disabled

in “Update Notice” (➔ page 81).

By way of optimized circuitry, this function reduces

power consumption when the AV receiver is in

standby mode. The HYBRID STANDBY indicator will

light in either of the following conditions:

–“HDMI Through” is enabled (the HDMI indicator is

off).

–“Network Standby” is enabled (the NET indicator

is off).

Note

• If Zones are turned on or, if a mobile device connected to

the Front Input (MHL) is charging, the HYBRID STANDBY

indicator won’t light.

Initial Setup

This section explains the settings that we recommend

you to make before using the AV receiver for the very

first time. A setup wizard is launched upon first-time

use to let you perform those settings.

Tip

• The on-screen menus appear only on a TV that is

connected to HDMI OUT MAIN.

This step determines the language used for the on-

screen setup menus. See “Language” in “OSD

Setup” (➔ page 77).

Tip

• Pressing HOME will close the setup wizard. To restart the

initial setup, select “Initial Setup” in the “Hardware Setup”

menu (➔ page 81).

After selecting the language for on-screen setup

menus, a welcome screen is displayed.

This step performs the automatic speaker setup.

Firmware Update Notification

About the HYBRID STANDBY indicator

Selecting the Language for the On-

screen Setup Menus

1st Step : Audyssey MultEQ XT32: Auto Setup

2nd Step : Source Connection

3rd Step : Remote Mode Setup

4th Step : Network Connection

Yes

Welcome to initial setup. Have you connected all the speakers and devices?

Before starting, please connect speakers and sources.

Now, would you like to start initial setup?

Exit

Initial Setup

HOME

Use q/w on the AV receiver or remote

controller to select one of the following

options, and then press ENTER.

` Yes:

Continues to “Audyssey MultEQ XT32:

Auto Setup”.

` No:

Skips the settings and terminates the initial

setup. The setup wizard goes to

“Terminating the Initial Setup” (➔ page 27).

You can always restart the initial setup by

selecting “Initial Setup” in the “Hardware

Setup” menu (➔ page 81).

Audyssey MultEQ XT32: Auto Setup

Use q/w to select one of the following options,

and then press ENTER.

` Do it Now:

The automatic speaker setup is performed

following instructions on screen. Refer to

step 2 of “Using the Automatic Speaker

Setup” (➔ page 28). When this setting is

complete, the setup wizard continues to

“Source Connection”.

` Do it Later:

Skips this setting.

Press ENTER and continue to “Source

Connection”.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-NR929 Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-NR929

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info