Bedienungsanleitung Onkyo TX-NR929 (Seite 28 von 160) (Englisch)

517568

Zoom out

Zoom in

Vorherige Seite

1/160

Nächste Seite

Turning On & Basic Operations

En-28

With the supplied calibrated microphone,

Audyssey MultEQ

XT32 automatically determines

the number of speakers connected, their size for

purposes of bass management, optimum crossover

frequencies to the subwoofer (if present), and

distances from the primary listening position.

Audyssey MultEQ XT32 then removes the distortion

caused by room acoustics by capturing room

acoustical problems over the listening area in both

the frequency and time domain. The result is clear,

well-balanced sound for everyone.

Audyssey MultEQ XT32 can be used with

Audyssey Dynamic EQ

and

Audyssey Dynamic Volume

(➔ page 72).

Before using this function, connect and position all of

your speakers.

Audyssey MultEQ XT32 offers two ways of

measuring: the “Audyssey Quick Start” and

“Audyssey MultEQ XT32 Full Calibration”.

•“Audyssey Quick Start” uses the measurement

from one position to perform the speaker setting

only.

•“Audyssey MultEQ XT32 Full Calibration” uses

the measurement from eight positions to correct

room response in addition to the speaker setting.

The more positions are used in measuring, the better

the listening environment will become. We

recommend using a measurement from eight

positions to create the best listening environment.

The Quick Start takes 2 minutes and Full Calibration

takes about 20 minutes.

Total measurement time varies depending on the

number of speakers.

Measurement procedure

To create a listening environment in your home

theater that all listeners will enjoy,

Audyssey MultEQ XT32 takes measurements at up to

eight positions within the listening area. Position the

microphone at ear height of a seated listener with the

microphone tip pointed directly at the ceiling using a

tripod. Do not hold the microphone in your hand

during measurements as this will produce inaccurate

results.

■ First measurement position

Also referred to as the Main Listening Position, this

refers to the most central position where one would

normally sit within the listening environment.

Audyssey MultEQ XT32 uses the measurements

from this position to calculate speaker distance, level,

and the optimum crossover value for the subwoofer.

■ Second-eighth measurement positions

These are the other listening positions (i.e., the

places where the other listeners will sit). You can

measure up to eight positions.

Note

• Make the room as quiet as possible. Background noise and

Radio Frequency Interference (RFI) can disrupt the room

measurements. Close windows, televisions, radios, air

conditioners, fluorescent lights, home appliances, light

dimmers, or other devices. Turn off the cell phone (even if

it is not in use) or place it away from all audio electronics.

• The microphone picks up test tones played through each

speaker as Audyssey MultEQ XT32 Room Correction and

Speaker Setup runs.

• Audyssey MultEQ XT32 Room Correction and Speaker

Setup cannot be performed while a pair of headphones is

connected.

Using the Automatic Speaker Setup

fed

: Listening area

a to h: Listening position

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-NR929 Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-NR929

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info