Bedienungsanleitung Onkyo TX-NR929 (Seite 58 von 160) (Englisch)

517568

Zoom out

Zoom in

Vorherige Seite

1/160

Nächste Seite

Advanced Operations

En-58

Operating

procedure

(➔ page 57)

Note

“BLUETOOTH” cannot be selected, if you’ve selected

NET or USB as input selector in Multi Zone.

When HDMI IN 1/2/3/AUX INPUT is displayed on the

main preview, HDMI IN 4 is also displayed on the

preview thumbnails.

• The video preview is not displayed when the “Zone 2

Monitor Out” setting is set to “Use” (➔ page 62).

• The video of the currently-selected input is displayed on

the main screen, not on a preview thumbnail.

“Dynamic EQ” and “Dynamic Volume” cannot be

selected when any of the THX listening modes is

selected, with “Loudness Plus” set to “On” or “Preserve

THX Settings” set to “Yes” (➔ pages 67, 68).

• When the “Monitor Out” setting is set to “Sub”, “Video”

cannot be selected (➔ page 62).

• This setting cannot be used with the “NET”, “USB” and

“BLUETOOTH” input selectors.

Only when you have selected “Custom” in the “Picture

Mode” (➔ page 74), pressing ENTER allows you to

adjust the following items via the Quick Setup:

“Brightness”, “Contrast”, “Hue” and “Saturation”. Press

RETURN to return to the “Picture Mode” setting.

Depending on the input source and listening mode, not

all channels shown here output the sound.

• This setting is not available in either of the following

cases:

– The “Audio TV Out (Main)” setting is set to “On”

(➔ page 79) or “Audio TV Out (Sub)” setting is set to

“On” (➔ page 79) and you’re listening through your TV

speakers.

–“HDMI CEC (RIHD)” is set to “On” (➔ page 78) and

you’re listening through your TV speakers.

Explanatory Notes

a Setting target

b Setting options (default setting underlined)

You can change various audio settings from the

Quick Setup (➔ page 57).

Note

• These settings are not available in either of the following

cases:

– The “Audio TV Out (Main)” setting is set to “On”

(➔ page 79) or “Audio TV Out (Sub)” setting is set to

“On” (➔ page 79) and you’re listening through your TV

speakers.

–“HDMI CEC (RIHD)” is set to “On” (➔ page 78) and

you’re listening through your TV speakers.

Sound Program

■ Sound Program

` Stereo Source 1, Stereo Source 2, Stereo

Source 3, Multich Source 1, Multich Source 2,

Multich Source 3

` Off

With this setting, you can select the combination of

settings that you registered in “Sound Program Edit”

(➔ page 71).

Note

• If the input selector is changed, the “Sound Program”

setting is switched back to “Off”.

Tone Control

■ Bass

` –10dB to 0dB

to +10dB in 2 dB steps.

You can boost or cut low-frequency sounds

output from the front speakers.

■ Treble

` –10dB to 0dB

to +10dB in 2 dB steps.

You can boost or cut high-frequency sounds

output from the front speakers.

You can adjust the bass and treble for the front

speakers, except when the Direct, Pure Audio or THX

listening mode is selected.

Operating on the AV receiver

■ Phase Matching Bass

` Off

` On

Using the Audio Settings of Quick

Setup

Press TONE repeatedly to select either “Bass”

or “Treble”.

Use – and + to adjust.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-NR929 Seite 58

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-NR929

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info