Bedienungsanleitung Onkyo TX-NR929 (Seite 59 von 160) (Englisch)

517568

Zoom out

Zoom in

Vorherige Seite

1/160

Nächste Seite

Advanced Operations

En-59

Operating

procedure

(➔ page 57)

Phase Matching Bass

■ Phase Matching Bass

` Off

` On

From the warm low notes produced by a cello to the

deep frequencies of electronic music, a good audio

system should be able to deliver plenty of bass

resonance.

While traditional enhancement systems effectively

boost low-frequency sound, they are often prone to

the effects of phase shifting, which can overwhelm

mid-range frequencies and muddy the sound. Our

Phase-Matching Bass Boost technology effectively

preserves mid-range clarity-allowing vocals and

strings to shine-while maintaining a smooth, powerful

bass response at all volume levels.

Note

• The Phase Matching Bass is disabled when the Direct,

Pure Audio, or THX listening mode is selected.

• If the “Subwoofer” setting is set to “No”, this setting is fixed

to “Off”.

• When “Sound Program” is enabled, this setting cannot be

used if the “Subwoofer” setting is set to “No” in “Sound

Program Edit” (➔ page 71).

Operating on the AV receiver

Speaker Levels

■ Subwoofer Level

` –15.0dB to 0.0dB

to +12.0dB in 0.5 dB steps.

■ Center Level

` –12.0dB to 0.0dB to +12.0dB in 0.5 dB steps.

You can adjust the volume of each speaker while

listening to an input source.

These temporary adjustments are cancelled when the

AV receiver is set to standby. To save the setting you

made here, go to “Level Calibration” (➔ page 66)

before setting the AV receiver to standby.

Note

• You cannot use these function while the AV receiver is

muted.

• These settings cannot be used while a pair of headphones

is connected.

• Speakers that are set to “No” or “None” in

“Speaker Configuration” (➔ page 65) cannot be adjusted.

• When “Sound Program” is enabled, “Subwoofer Level”

cannot be used if the “Subwoofer” setting is set to “No” in

“Sound Program Edit” (➔ page 71).

Audyssey

■ Audyssey

See “Audyssey” in “4. Source Setup” (➔ page 71).

■ Dynamic EQ

See “Dynamic EQ” in “4. Source Setup” (➔ page 72).

■ Dynamic Volume

See “Dynamic Volume” in “4. Source Setup”

(➔ page 72).

Note

• These technologies can be used when all the following

conditions are met:

– Room Correction and Speaker Setup is completed. Note

that “Audyssey” requires the “Audyssey MultEQ XT32

Full Calibration” method.

– Any listening mode other than Direct or Pure Audio is

selected.

– A pair of headphones is not connected.

• The setting is stored individually for each input selector.

•“Dynamic EQ” and “Dynamic Volume” cannot be selected

when any of the THX listening modes is selected, with

“Loudness Plus” set to “On” or “Preserve THX Settings”

set to “Yes” (➔ pages 67, 68).

• When “Sound Program” is enabled, the setting must be

made with “Sound Program Edit” (➔ page 71).

Late Night

■ Late Night

For Dolby Digital and Dolby Digital Plus sources,

the options are:

` Off

` Low:

Small reduction in dynamic range.

` High:

Large reduction in dynamic range.

For Dolby TrueHD sources, the options are:

` Auto

The Late Night function is set to “On” or “Off”

automatically.

` Off

` On

Turn this setting on to reduce the dynamic range of

Dolby Digital material so that you can still hear quiet

parts even when listening at low volume levels—ideal

for watching movies late at night when you don’t want

to disturb anyone.

Note

• The effect of the Late Night function depends on the

material that you are playing and the intention of the original

sound designer, and with some material there will be little

or no effect when you select the different options.

• The Late Night function can be used only when the input

source is Dolby Digital, Dolby Digital Plus, or Dolby

TrueHD.

Press TONE repeatedly to select “Phase

Matching Bass”.

Use – and + to change the setting.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-NR929 Seite 59

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-NR929

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info