Bedienungsanleitung Onkyo TX-NR929 (Seite 71 von 160) (Englisch)

517568

Zoom out

Zoom in

Vorherige Seite

1/160

Nächste Seite

Advanced Operations

En-71

Operating

procedure

(➔ page 61)

DTS and DTS-HD High Resolution sources

DSD (Super Audio CD) sources

Sound Program Edit

■ Sound Program

` Stereo Source 1, Stereo Source 2, Stereo

Source 3, Multich Source 1, Multich Source 2,

Multich Source 3

When playing back different content types on the

same source, or when listening to a single content

type on different sources, you can pre-register the

settings that best suit each content in “Sound

Program”. The registered settings can then be called

up and modified in one set. Use “Sound Program

Edit” to register and modify a combination of settings.

Tip

• To select the registered settings, see “Sound Program”

(➔ page 58).

■ Listening Mode

You can assign a default listening mode that will be

selected automatically when you select the sound

program.

The “Last Valid” option means that the listening

mode selected last will be used.

The “Straight Decode” option means that straight

decoding listening mode (Dolby Digital, DTS, etc.) is

selected.

■ Subwoofer

` No, Yes

You can choose whether or not to use the subwoofer

with the sound program.

■ Music Optimizer

` Off, On

See “Music Optimizer” (➔ page 60).

■ Equalizer

` Off

` Manual:

The manual setting in “Equalizer Settings”

(➔ page 67) is applied.

■ Audyssey

` Off, Movie, Music

See “Audyssey” (➔ page 59).

■ Dynamic EQ

*1*2

` Off, On

See “Dynamic EQ” (➔ page 59).

■ Dynamic Volume

*1*2

` Off, Light, Medium, Heavy

See “Dynamic Volume” (➔ page 59).

Note

•“Listening Mode” is only available when the input signal

matches the setting of “Sound Program”.

• You cannot select the “Subwoofer” setting if you set it to

“No” in “Speaker Configuration”.

•“Music Optimizer” is only available when “Stereo

Source 1”, “Stereo Source 2” or “Stereo Source 3” is

selected.

• When “Audyssey Quick Start” has been used for

measurement, the “Audyssey”setting cannot be selected.

This setting cannot be used when the “Listening Mode”

setting is set to “Pure Audio” or “Direct”.

To enable this setting, you must first perform the Room

Correction and Speaker Setup.

Items can be set individually for each input selector.

Press the input selector buttons to select an input

source.

Audyssey

The tone for each speaker is set automatically by

Audyssey MultEQ

XT32 Room Correction and

Speaker Setup. To enable the following settings, you

must first perform the Room Correction and Speaker

Setup (➔ page 28).

• These technologies cannot be used when a pair of

headphones is connected.

■ Audyssey

` Off

` Movie:

Select this setting for movie material.

The Audyssey indicator will light.

` Music:

Select this setting for music material.

The Audyssey indicator will light.

Note

• When “Audyssey Quick Start” has been used for

measurement, “Audyssey” cannot be selected.

4. Source Setup

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-NR929 Seite 71

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-NR929

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info