Bedienungsanleitung Onkyo TX-NR929 (Seite 74 von 160) (Englisch)

517568

Zoom out

Zoom in

Vorherige Seite

1/160

Nächste Seite

Advanced Operations

En-74

Operating

procedure

(➔ page 61)

Picture Adjust

Using Picture Adjust, you can adjust the picture

quality and reduce any noise appearing on the

screen.

Press ENTER to view the TV picture while setting

when the video source is output to HDMI OUT MAIN.

To return to the previous screen, press RETURN.

■ Wide Mode

*1*6

This setting determines the aspect ratio.

` 4:3:

` Full:

` Zoom:

` Wide Zoom:

` Auto

According to the input signals and monitor

output setting, the AV receiver automatically

selects the aspect ratio. See “Monitor Out” for

details on the monitor output setting

(➔ page 62).

■ Picture Mode

` Custom:

All settings can be performed manually.

` ISF Day:

Select when the room is bright.

` ISF Night:

Select when the room is dark.

` Cinema:

Select when the picture source is a movie or

alike.

` Game:

Select when the video source is a game

console.

` Standard:

Does not adjust picture quality (changes

resolution).

` Bypass:

Does not adjust picture quality (does not change

resolution).

With “Picture Mode”, you can change the following

settings to be suitable for the movie or game screen

by one operation; “Game Mode”, “Film Mode”, “Edge

Enhancement”, “Noise Reduction”, “Resolution”,

“Brightness”, “Contrast”, “Hue”, “Saturation”,

“Color Temperature”, “Gamma”, “Red Brightness”,

“Red Contrast”, “Green Brightness”, “Green

Contrast”, “Blue Brightness” or “Blue Contrast”.

The receiver has been designed to incorporate setup

and calibration standards established by the Imaging

Science Foundation (ISF). The ISF has developed

carefully crafted, industry-recognized standards for

optimal video performance and has implemented a

training program for technicians and installers to use

these standards to obtain optimal picture quality from

the receiver. Accordingly, Onkyo recommends that

setup and calibration be performed by an ISF

Certified installation technician.

■ Game Mode

*2*3*4

` Off

` On

If video signal delay occurs during playback on a video

component (i.e., game console), select the

corresponding input source and set the “Game Mode”

setting to “On”. The delay will decrease but in return

the picture quality will become poor.

■ Film Mode

*2*4

` Video:

“Film Mode” detection is not applied and the

input signal is handled as a video source.

` Auto:

Detects whether the input signal is a video or a

movie. If it is a movie, the appropriate

conversion is applied.

The AV receiver will adjust to the picture source,

automatically converting it to the appropriate

progressive signal and reproducing the natural quality

of the original picture.

■ Edge Enhancement

*2*4*5

` Off

` Low

` Mid

` High

With this setting, you can make the picture appear

sharper.

■ Noise Reduction

*2*4*5

` Off

` Low

` Mid

` High

With this setting, you can reduce noise appearing on

the screen. Select the desired level.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-NR929 Seite 74

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-NR929

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info