Bedienungsanleitung Onkyo TX-NR929 (Seite 76 von 160) (Englisch)

517568

Zoom out

Zoom in

Vorherige Seite

1/160

Nächste Seite

Advanced Operations

En-76

Operating

procedure

(➔ page 61)

Audio Selector

■ Audio Selector

` ARC:

The audio signal from your TV tuner can be sent

to HDMI OUT MAIN of the AV receiver.

With this selection, the TV’s audio can be

automatically selected as a priority among other

assignments.

` HDMI:

This can be selected when HDMI IN has been

assigned as an input source. If both HDMI

(HDMI IN) and digital audio inputs (COAXIAL IN

or OPTICAL IN) have been assigned, HDMI

input is automatically selected as a priority.

` COAXIAL:

This can be selected when COAXIAL IN has

been assigned as an input source. If both

coaxial and HDMI inputs have been assigned,

coaxial input is automatically selected as a

priority.

` OPTICAL:

This can be selected when OPTICAL IN has

been assigned as an input source. If both optical

and HDMI inputs have been assigned, optical

input is automatically selected as a priority.

` Analog:

The AV receiver always outputs analog signals.

You can set priorities of audio output when there are

both digital and analog inputs.

Note

• This setting can be made only for an input source that is

assigned to HDMI IN, COAXIAL IN, or OPTICAL IN.

• This setting cannot be used with the “NET”, “USB” and

“BLUETOOTH” input selectors.

• When using the Whole House Mode, this setting cannot be

selected.

•With the GAME2 input selector, “Analog” cannot be used.

You can select “ARC” if you select the TV/CD input

selector. But you cannot if you’ve selected “Off” in the

“Audio Return Channel” setting (➔ page 79).

Setting the Incoming Digital Signal (Fixed

Mode)

■ Fixed Mode

` Off

The format is detected automatically. If no digital

input signal is present, the corresponding analog

input is used instead.

` PCM:

Only 2-channel PCM format input signals will be

heard. If the input signal is not PCM, the PCM

indicator will flash and noise may also be

produced.

` DTS:

Only DTS (but not DTS-HD) format input signals

will be heard. If the input signal is not DTS, the

dts indicator will flash and there will be no

sound.

When “HDMI”, “COAXIAL” or “OPTICAL” is selected

in the “Audio Selector” setting, you can then specify

the signal type in “Fixed Mode”.

Normally, the AV receiver detects the signal format

automatically. However, if you experience either of

the following issues when playing PCM or DTS

material, you can manually set the signal format to

PCM or DTS.

• If the beginnings of tracks from a PCM source are

cut off, try setting the format to PCM.

• If noise is produced when fast forwarding or

reversing a DTS CD, try setting the format to DTS.

Note

• The setting will be reset to “Off” when you change the

setting in “Audio Selector”.

You can assign a default listening mode to each input

source that will be selected automatically when you

select each input source. For example, you can set

the default listening mode to be used with Dolby

Digital input signals. You can select other listening

modes during playback, but the mode specified here

will be resumed once the AV receiver has been set to

standby.

5. Listening Mode Preset

Use q/w to select the input source that you

want to set, and then press ENTER.

The following menu appears.

Use q/w to select the signal format that you

want to set, and then use e/r to select a

listening mode.

Only listening modes that can be used with each

input signal format can be selected (➔ pages 45

to 52).

The “Last Valid” option means that the listening

mode selected last will be used.

The “Straight Decode” option means that

straight decoding listening mode (Dolby Digital,

DTS, etc.) is selected.

Note

• For the “TUNER” input selector, only “Analog” will be

available.

• For the “NET” or “USB” input selector, “Digital” and

“TrueHD” will be available.

Default listening mode for analog and PCM sources.

Analog/PCM

Mono/Multiplex Source

2ch Source

Dolby D/Dolby D Plus/TrueHD

DTS/DTS-ES/DTS-HD

Other Multich Source

Last Valid e r

5-1. Listening Mode Preset

BD/DVD

Last Valid

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-NR929 Seite 76

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-NR929

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info