Bedienungsanleitung Onkyo TX-NR929 (Seite 79 von 160) (Englisch)

517568

Zoom out

Zoom in

Vorherige Seite

1/160

Nächste Seite

Advanced Operations

En-79

Operating

procedure

(➔ page 61)

■ Audio TV Out (Main)

` Off

` On

This preference determines whether the incoming

audio signal is output from HDMI OUT MAIN. You

may want to turn this preference on if your TV is

connected to HDMI OUT MAIN and you want to listen

to the audio from a connected component through

your TV’s speakers. Normally, this should be set to

“Off”.

Note

• If “On” is selected and the audio can be output from the TV,

the AV receiver will output no sound through its speakers.

In this case, “TV Speaker” appears on the AV receiver’s

display by pressing DISPLAY.

• When “HDMI CEC (RIHD)” is set to “On”, this setting is

fixed to “Auto”.

• When “Speakers Type(Front)” is set to “Digital

Crossover”, this setting is fixed to “Off”.

• This setting is fixed to “Off” when “Monitor Out” is set to

“Sub” (➔ page 62).

• With some TVs and input signals, no sound may be output

even when this setting is set to “On”.

• When “Audio TV Out (Main)” or

“HDMI CEC (RIHD)” is set

“On” and you’re listening through your TV’s speakers,

turning up the AV receiver’s volume control will make the

sound be output from the AV receiver’s front left and right

speakers. To stop the AV receiver’s speakers producing

sound, change the settings, change your TV’s settings, or

turn down the AV receiver’s volume.

• Listening mode cannot be changed when this setting is set

to “On” and the audio is output from the TV.

• If the audio signal from the player is not supported by the

TV, the audio is not output from the TV even if this setting

is enabled. When the audio cannot be output from the TV,

(When “Monitor Out” is set to “Both”, the audio cannot be

output form the TV connected to both HDMI OUT MAIN and

HDMI OUT SUB) the audio is output from the speakers

connected to the AV receiver.

■ Audio TV Out (Sub)

` Off

` On

This preference determines whether the incoming

audio signal is output from HDMI OUT SUB. You may

want to turn this preference on if your TV is

connected to HDMI OUT SUB and you want to listen

to the audio from a connected component through

your TV’s speakers. Normally, this should be set to

“Off”.

Note

• If “On” is selected and the audio can be output from the TV,

the AV receiver will output no sound through its speakers.

In this case, “TV Speaker” appears on the AV receiver’s

display by pressing DISPLAY.

• When “Speakers Type(Front)” is set to “Digital

Crossover”, this setting is fixed to “Off”.

• This setting is fixed to “Off” when “Monitor Out” is set to

“Main” (➔ page 62).

• When “Monitor Out” is set to “Both” (➔ page 62), and this

setting is enabled, set audio output of source component to

2ch PCM.

• With some TVs and input signals, no sound may be output

even when this setting is set to “On”.

• When “Audio TV Out (Sub)” is set to

“On” and you’re

listening through your TV’s speakers, turning up the AV

receiver’s volume control will make the sound be output

from the AV receiver’s front left and right speakers. To stop

the AV receiver’s speakers producing sound, change the

settings, change your TV’s settings, or turn down the AV

receiver’s volume.

• Listening mode cannot be changed when this setting is set

to “On” and the audio is output from the TV.

• When “Monitor Out” is set to “Both” (➔ page 62) and only

“Audio TV Out (Sub)” is set to “On”, the audio is not output

from the TV connected to HDMI OUT SUB except in the

case the audio input is via HDMI.

• If the audio signal from the player is not supported by the

TV, the audio is not output from the TV even if this setting

is enabled. When the audio cannot be output from the TV,

(When “Monitor Out” is set to “Both”, the audio cannot be

output form the TV connected to both HDMI OUT MAIN and

HDMI OUT SUB) the audio is output from the speakers

connected to the AV receiver.

■ Audio Return Channel

` Off

` Auto:

The audio signal from your TV tuner can be sent

to HDMI OUT MAIN of the AV receiver.

The audio return channel (ARC) function allows an

ARC capable TV to send the audio stream to HDMI

OUT MAIN of the AV receiver. To use this function,

you must select the TV/CD input selector and your TV

must be ARC capable. Default setting: “-----”

Note

• This setting is fixed to “-----” when the “HDMI CEC

(RIHD)” setting is set to “Off”.

• This setting is set to “Auto” automatically when the “HDMI

CEC (RIHD)” setting is set to “On” for the first time.

• If you set “Audio Return Channel” to “Auto”, the “Audio

Selector” settings of the TV/CD input selector will be

automatically switched to “ARC” (➔ page 76).

Tip

• After changing the settings of the “HDMI CEC (RIHD)”,

“HDMI Through” or “Audio Return Channel”, turn off the

power on all connected pieces of equipment and then turn

them on again. Refer to the user’s manuals for all

connected pieces of equipment.

■ Lip Sync

` Off

` On

This function allows the AV receiver to automatically

correct any delay between the video and the audio,

based on the data from the connected monitor.

Note

• This function works only if your HDMI-compatible TV

supports HDMI Lip Sync.

Onkyo TX-NR929 Seite 79

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-NR929

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info