Bedienungsanleitung Onkyo TX-RZ3100 (Seite 65 von 110) (Englisch)

645299

Zoom out

Zoom in

Vorherige Seite

1/110

Nächste Seite

> Specifications > Settings > Listening Modes > Playback Function > Basic Manual

Troubleshooting | Appendix

select "On (All Channels)", and to disable just the front

speakers you should select "On (Except Front Left /

Right)".

6. Disconnect the speaker setup microphone. You cannot

use any other menu options while it is connected.

■ 2� Source Connection

Check that each input source is connected correctly.

Follow the guidance, select the input you want to confirm,

start play of the selected player, and confirm that the

images appear on the TV and that sound is played.

■ 3� Network Connection

Set up Wi-Fi connection with an access point such as a

wireless LAN router. There are the following two methods

of connecting by Wi-Fi:

"Scan Networks": Search for an access point from this

unit. Find out the SSID of the access point beforehand.

"Use iOS Device (iOS7 or later)": Share the iOS device's

Wi-Fi settings with this unit.

If you select "Scan Networks", there are a further two

choices of connection method. Check the following.

"Enter Password": Enter the password (or key) of the

access point to connect.

"Push Button": If the access point has an automatic

connection button, you can connect without entering a

password.

•

If the SSID of the access point is not displayed, then in

the screen listing the SSIDs, select "Other..." with the

cursor on the remote controller and press ENTER, then

follow the onscreen instructions.

Keyboard input

Wi-Fi Setup

Password

When finished, select the "OK" key.

Ɵơ

OKA/a

a b cdefgh i jklm

nopqrstuvwxy z

1 2 3456789 0-^\

,./;:@[ ]

A/aHide/ShowAll Erase

To switch between upper and lower case, select "A/a" on

the screen and press ENTER. To select whether to mask

the password with "

＊

" or display it in plain text, press

MEMORY on the remote controller. Pressing CLR will

delete all the input characters.

•

A confirmation screen asking you to agree to the privacy

policy is displayed during network setting. Select "Yes"

and press ENTER to indicate agreement.

■ 4� Multi Zone Setup

Make these settings to enjoy video and audio in a room

other than the main room (ZONE 2/ZONE 3).

Select "Using AV Receiver" when connecting speakers

in the separate room. Select "with External Premain

Amplifier" when connecting a pre-main amplifier in the

separate room. Select "with External Power Amplifier"

when connecting a power amplifier.

If you are going to be connecting a TV in the separate

room (ZONE 2), then when "Would you be using TV in 2nd

room?" is displayed, select "Yes".

■ 5� Audio Return Channel

If you have connected a TV that supports ARC, select

"Yes". This unit's ARC setting turns on and you can listen

to the TV's audio through this unit.

•

If you select "Yes", the HDMI CEC function is enabled

and power consumption increases during standby.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-RZ3100 Seite 65

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-RZ3100

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info