Bedienungsanleitung Onkyo TX-RZ3100 (Seite 66 von 110) (Englisch)

645299

Zoom out

Zoom in

Vorherige Seite

1/110

Nächste Seite

> Specifications > Settings > Listening Modes > Playback Function > Basic Manual

Troubleshooting | Appendix

Quick Menu

You can quickly adjust settings you frequently use, such as

tone adjustments, etc.

Operation:

You can make the settings on the TV screen while playing

something. Press Q on the remote controller to display the

Quick Menu.

Quick Menu

Tone

Level

AccuEQ

Other

Bass

Treble

BD/DVD

Select the item with the cursor / buttons of the remote

controller and press ENTER to confirm your selection.

Use the cursors to change the settings.

•

To return to the previous screen, press .

•

To exit the settings, press Q.

■ Tone

Bass:

Enhance or moderate the bass range of the front speakers.

Treble:

Enhance or moderate the treble range of the front speakers.

•

It cannot be set if the listening mode is Pure Audio,

Direct or THX.

■ Level

Center:

Adjust the speaker level of the center speaker while

listening to some sound.

Subwoofer 1 / Subwoofer 2:

Adjust the speaker level of the subwoofer while listening to

some sound.

•

The adjustment you made will be reset to the previous

status when you turn the unit to standby mode.

■ AccuEQ

AccuEQ Room Calibration:

Enable or disable the equalizer function that corrects for

distortion caused by the acoustic environment of the room.

If this is to be enabled, then normally you should select

"On (All Ch)", and to disable just the front speakers you

should select "On (ex. L/R)". The setting can be separately

set to each input selector.

Equalizer:

Select "Preset 1" to "Preset 3" configured in "2. Speaker"

- "Equalizer Settings" in the Setup menu. The same sound

field setting is applied all ranges when set to "Off".

EQ for Standing Wave :

Select whether to enable or disable the standing wave

control calibrated in "2. Speaker" - "EQ for Standing Wave"

in the Setup menu.

•

It cannot be set if the listening mode is Pure Direct.

Re-EQ, Re-EQ(THX):

Adjust the soundtrack that was processed to enhance

its high pitch range, in order to make it suitable for home

theater.

In Re-EQ, the following listening modes can be used:

Dolby Digital, Dolby Digital Plus, Dolby Surround, Dolby

TrueHD, Multichannel, DTS, DTS-ES, DTS 96/24, DTS-

HD High Resolution Audio, DTS-HD Master Audio, DTS

Neural:X, DTS Express, and DSD.

In Re-EQ(THX), the following listening modes can be used:

THX Cinema, and THX Select2 Cinema.

•

It cannot be set if the listening mode is Pure Audio or

Direct.

■ Other

A/V Sync :

If the video is behind the audio, you can delay the audio to offset

the gap. Different settings can be set for each input selector.

•

It cannot be set if the listening mode is Pure Audio or

Direct.

Music Optimizer:

Improve the quality of the compressed audio. Playback

sound of lossy compressed files such as MP3 will be

improved. The setting can be separately set to each input

selector. The setting is effective with 2 ch signals with a

sampling frequency of 48 kHz or less. The setting is not

effective in the bitstream signals. This function works in

the Stereo, Mono, All Ch Stereo, and Full Mono listening

modes.

Late Night:

Make small sounds easily heard. It is useful when you

need to reduce the volume while watching a movie late

night. You can enjoy the effect only when playing Dolby

series and DTS series input signals.

•

The setting cannot be used in the following cases.

–

If "Loudness Management" is set to "Off" when

playing Dolby Digital Plus or Dolby TrueHD

–

When the input signal is DTS:X and "Dialog Control"

is other than 0 dB

Center Spread:

Adjust the width of the sound field of the front channel

when playing in the Dolby Surround listening mode. To

spread the width of the sound field to the left and right, set

to "On". To concentrate sound in the center, set to "Off".

•

Depending on the speaker settings, this becomes "Off".

Dialog Control:

You can increase the dialog portion of the audio in 1 dB

steps up to 6 dB so that you can make dialog easier to

hear over background noise.

•

This cannot be set for content other than DTS:X.

•

The effect may not be selectable with some content.

Screen Centered Dialog:

Front high speakers are used to move acoustic images

such as dialogs from the center speakers upward

according to the height of the TV screen. Acoustic images

of the center speakers move up as the set value is

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-RZ3100 Seite 66

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-RZ3100

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info