Bedienungsanleitung Onkyo TX-SR605 (Seite 95 von 100) (Englisch)

62549

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

Troubleshooting—Continued

The surround back speakers produce no sound

• The surround back speakers are not used with all listen-

ing modes. Select another listening mode (page 66).

• Not much sound may be produced by the surround

back speakers with some sources.

• Make sure the speakers are configured correctly

(page 70).

The subwoofer produces no sound

• When you play source material that contains no infor-

mation in the LFE channel, the subwoofer produces

no sound.

• Make sure the speakers are configured correctly

(page 70).

There’s no sound with a certain signal format

• Check the digital audio output setting on the con-

nected device. On some game consoles, such as those

that support DVD, the default setting is off.

• With some DVD-Video discs, you need to select an

audio output format from a menu.

• Depending on the input signal, some listening modes

cannot be selected (pages 62-65).

Can’t select the DTS-ES Discrete/Matrix listen-

ing modes

• These modes cannot be selected when no surround

back speakers are connected, or the Zone 2 speakers

are being used.

• You can not always select all of the listening modes,

depending on the number of the speaker connected

(pages 62-65).

Can’t get 6.1/7.1 playback

• If no surround back speakers are connected, or the

Zone 2 speakers are being used, 6.1/7.1 playback is

not possible.

• You can not always select all of the listening modes,

depending on the number of the speakers connected

(pages 62-65).

The volume cannot be set to 99

• When the levels of all speakers have been calibrated

(page 73), the maximum volume setting may change.

Noise can be heard

• Using cable ties to bundle audio cables with power

cords, speaker cables, and so on may degrade the

audio performance, so don’t do it.

• An audio cable may be picking up interference. Try

repositioning your cables.

The Late Night function doesn’t work

• Make sure the source material is Dolby Digital, Dolby

Digital Plus, and Dolby TrueHD (page 69).

The DVD analog multichannel input doesn’t

work

• Check the DVD analog multichannel input connec-

tions (page 28).

• To select the DVD analog multichannel input, press

the [MULTI CH] input selector button.

• Check the audio output settings on your DVD player.

About DTS signals

• When DTS program material ends and the DTS bit-

stream stops, the AV receiver/AV amplifier remains in

DTS listening mode and the DTS indicator remains

on. This is to prevent noise when you use the pause,

fast forward, or fast reverse function on your player. If

you switch your player from DTS to PCM, because

the AV receiver/AV amplifier does not switch formats

immediately, you may not hear any sound, in which

case you should stop your player for about three sec-

onds, and then resume playback.

• With some CD and LD players, you won’t be able to

playback DTS material properly even though your

player is connected to a digital input on the AV

receiver/AV amplifier. This is usually because the

DTS bitstream has been processed (e.g., output level,

sampling rate, or frequency response changed) and the

AV receiver/AV amplifier doesn’t recognize it as a

genuine DTS signal. In such cases, you may hear

noise.

• When playing DTS program material, using the pause,

fast forward, or fast reverse function on your player

may produce a short audible noise. This is not a mal-

function.

The beginning of audio received by an HDMI IN

can’t be heard

• Since it takes longer to identify the format of an

HDMI signal than it does for other digital audio sig-

nals, audio output may not start immediately.

There’s no picture

• Make sure that all video connecting plugs are pushed

in all the way (page 18).

• Make sure that each video component is properly con-

nected.

• If your TV is connected to the HDMI OUT, set the

HDMI Monitor setting to Yes (page 47), and select “-

- -” in the “HDMI Input Setup” on page 48 to watch

composite video, S-Video, and component video

sources.

• If your TV is connected to the COMPONENT VIDEO

OUT, set the HDMI Monitor setting to No (page 47),

and select “- - -” in the “Component Video Setup” on

page 49 to watch composite video and S-Video

sources.

Video

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-SR605 Seite 95

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-SR605

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info