Bedienungsanleitung Oppo BDP-83 (Seite 57 von 81) (Englisch)

492639

Zoom out

Zoom in

Vorherige Seite

1/81

Nächste Seite

SETUP MENU OPTIONS

motion can be achieved by enabling this option, provided that the TV and the disc both meet the

conditions for the conversion. The available options are:

• On – Convert DVD to 24Hz frame rate when possible.

• Off (default) – Do not convert DVD to 24Hz frame rate.

NOTE

The result of DVD 24p Conversion depends heavily on the quality of the content. If the video

encoded on the DVD contains incorrect 3:2 cadence, cadence breaks caused by edits, or

heavy compression noise that can affect cadence detection, the result may have motion

judder or frame tearing. Should this happen, you need to turn off DVD 24p Conversion and

watch the DVD in its original frame rate.

8. HDMI Options: To configure video options that are unique to the HDMI output. This item

contains a sub-menu with multiple configuration options. Please refer to the

HDMI Options

section on page

53 of this manual for details of each option.

9. Screen Saver: To turn on/off the screen saver function. The screen saver is designed to

minimize burn-in concerns for plasma and CRT display devices. The available options are:

• On – After about 3 minutes of inactivity, the player will show an animated OPPO logo

moving on a black background. This allows most areas of the screen to rest and gives all

areas an equal opportunity to refresh.

• Off – The screen saver will not be activated. Use this option if your TV does not have a

burn-in issue.

• Energy Saver – Video output will be turned off after 3 minutes of inactivity. Many

projectors and LCD TVs will go into a standby or sleep mode and turn off their projection

lamp or LCD backlight lamp, thus saving energy and prolonging the lamp life. When you

press any button on the OPPO remote control or the player’s front panel, the screen saver

will be cancelled and video output will be restored. If your TV is already in standby or sleep

mode, you may need to wake up the TV by pressing a button on its remote or control panel.

Picture Adjustment

Picture Adjustment is a special section of the Video Setup menu. It allows you to fine tune many picture

control parameters in order to achieve the optimal picture quality and visual result. To use Picture Adjustment,

press the SETUP button on the remote control to enter the player’s Setup Menu, and then choose “Video

Setup” – “Picture Adjustment”. The Setup Menu will be replaced by the Picture Adjustment menu:

Picture Mode

Brightness

Contrast

Hue (Analog)

Saturation

Detail Enhancement

Edge Enhancement

Noise Reduction

Y/C Delay

Border Level

-16

+16

Exit

Normal

To change a picture adjustment parameter, use the UP/DOWN ARROW buttons to highlight the

parameter, and use the LEFT/RIGHT ARROW buttons to change its value.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Oppo BDP-83 Seite 57

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Oppo BDP-83

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info