Bedienungsanleitung Oppo BDP-83 (Seite 59 von 81) (Englisch)

492639

Zoom out

Zoom in

Vorherige Seite

1/81

Nächste Seite

SETUP MENU OPTIONS

noise. Edge Enhancement works well for less pristine sources. It produces a sharpening effect

without making noise more visible.

It is also possible to adjust these two controls in different directions to achieve optimal results

from certain “difficult” materials. You may use Detail Enhancement to bring up detail in the

entire image, but if you find that object edges are over enhanced you can apply negative Edge

Enhancement to reduce the over enhancement of the edges.

Sharpness (Detail/Edge Enhancement) is a video processing function that can produce a

sharper looking picture but at the same time may cause unwanted artifacts. The OPPO BDP-83

Blu-ray Disc Player utilizes the fine detail and edge enhancement technology from VRS™

(Video Reference Series) by Anchor Bay for its HDMI output. This technology provides fine

control to achieve an optimal balance between enhancing sharpness and minimizing unwanted

artifacts. If the source content is properly produced, we generally recommend leaving these

controls at level 0.

7. Noise Reduction: To select whether the player shall apply video noise reduction processing.

Noise reduction levels can be set between 0 and 8. The default is level 0, which turns off noise

reduction. When set to a smaller positive level, the player adjusts the picture quality by

reducing the “mosquito noise” (artifacts around the outlines of objects). When set to a high level

between 6 and 8, the player also uses detail and edge enhancement controls to reduce “block

noise” (mosaic-like patterns caused by video compression) and “film grain noise” (natural

variation of picture intensity caused by film grain). Excessive noise reduction may cause a loss

of details. We recommend using the noise reduction function only when you encounter poorly

encoded or compressed video that has apparent noise artifacts.

8. Y/C Delay: To adjust the time difference between the Luminance (Y) and Chrominance (Pb/Pr

or Cb/Cr) channels of the video signal. When there is a significant lag between the channels,

the image will look “smeared” because the color component is not lining up properly to the black

and white luminance component. Adjust the Y/C delay setting only when the TV or projector

has a Y/C delay problem. For a display device that normally does not have Y/C alignment

problems, keep the Y/C delay setting at its default level of 0. The Y/C delay setting applies to

the HDMI output only.

9. Border Level: To set the brightness level of the border area when borders are inserted by the

player to maintain correct aspect ratio. The default level is 0, which corresponds to total black.

If you set it to a positive level, the bars gradually become lighter grey instead of black. This

setting may be useful for users with Plasma or CRT TVs that are sensitive to “burn-in”. A grey

border setting allows the phosphor in the bar area to be moderately used, and can alleviate the

burn-in problem. The Border Level setting only applies to the HDMI output, and only affects

borders inserted by the player. If the borders are encoded in the original video, the border

brightness level will not be affected by this setting.

HDMI Options

HDMI Options are a sub-menu of the Video Setup menu. It allows you to configure some video settings that

are unique to the HDMI output. To enter this sub-menu, select “HDMI Options” from the Video Setup menu.

To exit this sub-menu, press the RETURN button or the LEFT arrow key. The following HDMI options are

available:

1. De-interlacing Mode – To select the type of de-interlacing algorithm that the player should use

to convert interlaced video on a DVD or Blu-ray Disc to progressive output. The OPPO BDP-83

utilizes the Precision De-interlacing™ technology from VRS™ (Video Reference Series) by

Anchor Bay for its HDMI output. A proper de-interlacing mode will ensure the output video

matches the original contents and is free of de-interlacing artifacts. The available options are:

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Oppo BDP-83 Seite 59

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Oppo BDP-83

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info