Bedienungsanleitung Oppo BDP-93 (Seite 27 von 93) (Englisch)

492635

Zoom out

Zoom in

Vorherige Seite

1/93

Nächste Seite

INSTALLATION

Setting Up the Player - Easy Setup Wizard

Access the Easy Setup Wizard

When the player is turned on for the first time, an Easy Setup Wizard screen will appear. It is a series of

guided instructions designed to configure the basic settings for the player.

To start the Easy Setup Wizard, please follow these steps:

1) Turn on the TV.

2) Turn on the player.

3) Switch the input selection on your TV so that the TV displays the signal from the player. You

should see the first step of the Easy Setup Wizard.

If the Easy Setup Wizard has previously been completed or canceled, it will no longer initiate when you turn on

the player. Instead, you will see the background screen with the OPPO and Blu-Ray Disc logos. To access

Easy Setup Wizard, please press the SETUP button on the remote control, select Device Setup, then Reset

Factory Default. Select “OK” to confirm loading

the factory default settings. Once the factory

default settings are loaded the Easy Setup Wizard

will appear.

The first step of the Easy Setup Wizard allows you

to skip the entire wizard. If you are familiar with

setting up audio/video equipment and would like to

customize the player settings using its Setup Menu,

you may use the LEFT/RIGHT ARROW buttons to

select the “Cancel” option, then press the ENTER

key to exit the Easy Setup Wizard. Otherwise, to

continue with the Easy Setup Wizard, select the

“OK” option and press the ENTER key.

Choose the Primary Video Output

The player can output video through its HDMI and

component output terminals. (Composite video

output is also available but not recommended.) By

setting the “Primary Video Output” option, the

player can optimize video output of the selected

terminal. The choices are “HDMI 1”, “HDMI 2” and

“Analog”. If you connect the player to the TV using

an HDMI cable (see Method 1 on page 10, Method

2 on page 11, Method 5 on page 14, or Method 9 on

page 18), please select “HDMI 1” or “HDMI 2”

correspondingly. If you connect the player to the TV

using component video cables (see Method 4 on

page 13), please select “Analog”.

Please note: The best performance will be provided over the HDMI connection. Between the two HDMI

outputs, HDMI 1 should be given priority for use since it benefits from the superior Marvell QDEO video

processing solution.

To make your selection, use the UP/DOWN ARROW buttons to highlight the choice, and then press the

ENTER button to go to the next step.

Easy Setup

The Easy Setup Wizard will help you configure the

basic settings for this player. More detailed settings

can be accessed at the Setup Menu at any time after

finishing or exiting the wizard.

Press OK to initiate the Easy Setup Wizard, press

Cancel to exit this Wizard immediately.

Step: 1/6

Easy Setup

txeNsuoiverP

Step: 2/6

Choose the primary video output that you use.

Better performance will be provided over an HDMI

connection.

Analog

HDMI 1

HDMI 2

Enter

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Oppo BDP-93 Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Oppo BDP-93

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info