Bedienungsanleitung Oppo BDP-93 (Seite 28 von 93) (Englisch)

492635

Zoom out

Zoom in

Vorherige Seite

1/93

Nächste Seite

INSTALLATION

Select the Best Output Resolution

One of the major advantages of the OPPO Blu-Ray Disc Player is its ability to play high-definition Blu-Ray

video and also up-convert standard definition video stored on DVD discs to high definition. The sophisticated

video processor inside the player ensures that the video will have the best possible color, detail and motion.

The player offers several standard and high definition video output resolutions. To get the best visual result, it

is important to select an output resolution that best matches your TV or display device.

The rule of thumb when selecting an output resolution is to match the “native resolution” of your TV or display

device as closely as possible. The “native resolution” is the resolution of the actual display component in the

TV, such as the Plasma panel, LCD panel, or DLP™ chip. The TV may accept input signals with lower or

higher resolutions than its native resolution. In such cases the electronics in the TV will up-scale or down-

scale the video to fit its display component. Unfortunately many TVs on the market only do an average job

scaling the video. On the other hand, if you set the OPPO Blu-ray Disc Player to output a resolution that

matches or is very close to the native resolution of the TV, you are more likely to get a great picture.

For the latest generation of 1080p, “Full HD” or “True HD” displays, the best output resolution will naturally be

1080p. (A few early model 1080p displays do not accept 1080p signal. For these displays the best output

resolution to use is 1080i.) For all other digital televisions this will likely be 720p. For CRT tube or rear

projection televisions this will likely be 1080i. For EDTV displays (very rare if they have HDMI or DVI) this will

be 480p (NTSC) or 576p (PAL). These are general recommendations that work for most users, but there can

be exceptions. Advanced users may want to try all supported resolutions and choose the one that provides

the best visual result.

The OPPO Blu-ray Disc Player supports a special “Source Direct” output resolution on its HDMI output. This

resolution is recommended for use with external video processors or high-end TVs. In “Source Direct” mode,

the player works as a “transport”. It decodes video from the discs and then sends the raw video signal in its

native resolution and format, without extra processing, to the external video processor or TV. The actual

output resolution varies by content:

Content Source Direct Output Resolution

NTSC DVD 480i

PAL DVD 576i

Most Blu-ray Movies (film-source) 1080p 23.976Hz or 1080p 24Hz

Most Blu-ray TV shows or Concerts

(video-source)

1080i

SACD and DVD-Audio 1080i

Depending on your selection of “Primary Video

Output”, the available output resolution selections

will differ. For the HDMI 1 and HDMI 2 output, the

following output resolutions are available: Auto,

1080p, 1080i, 720p, 480p/576p, 480i/576i, and

Source Direct. If “Auto” is selected, the player will

determine its output resolution based on the best

signal resolution that the TV can display.

For the Analog (component) output, the following

output resolutions are available: 1080p, 1080i,

720p, 480p/576p and 480i/576i. Please note

1080p only applies to HDMI output, if it is selected

for component video outputs, it will automatically be

down-scaled to 1080i. Please refer to the specifications of your TV to find the best resolution to use.

Easy Setup

txeNsuoiverP

Step: 3/6

Choose the output resolution which best matches

your TV.

Change will be applied immediately. You will have

15 seconds to either save the new setting or

rollback to the previous output resolution.

720p

Auto

480p/576p

480i/576i

Source Direct

1080i

1080p

Enter

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Oppo BDP-93 Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Oppo BDP-93

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info