Bedienungsanleitung Optoma HQView-300 Series (Seite 22 von 30) (Englisch)

492719

Zoom out

Zoom in

Vorherige Seite

1/30

Nächste Seite

T:+44 1274 394125 F: +44 1274 730960 E: techsupport@calibreuk..com 18

3.9. System

This selection contains functions which are more applicable to system operation than to picture

adjustment.

3.9.1. User

Settings: USER 1, 2, 3, 4

A predefined setting stored under a user name can be selected. Several settings of the HQView-3xx

can be stored under a user name. Thus, different users can store their preferred HQView-3xx settings

and recall these profiles by picking up their user name from this menu.

Note: Using the Web interface, (any number of) settings can also be stored/restored to/from a PC disc

drive. This feature is only available on V2 hardware.

3.9.2. Names/Profiles

The Names/Profiles menu provides input masks to rename the generic input channels and user names.

User names and input channel names can be changed to any word with a maximum of 12 alpha

numeric characters with a value range of 0-9, A-Z and blank.

The Names/Profiles menu allows the user to store profiles under a certain user name. It also allows to

copy user profiles by loading a profile stored under one user name and save it under another user

name. Reset Profile allows to restore default HQView-3xx settings for the currently selected user.

3.9.3. Input Config

This menu provides items to configure the VGA, Component and DVI interface. It also allows to choose

a default test pattern.

The VGA submenu is for adjusting analogue computer video. A button for automatic setup of frequency

and phase of the sampling clock is provided. This automatic adjustment is strongly recommended.

Frequency (Clock) and phase can also be altered manually.

The HQView-3xx Component input is configured through the menu item Color Space to cope with either

RGB or YPbPr color space. The sync signal can be stripped from the Green or Y channel with the

setting 3 Wire or from the separate sync line with the setting 4 Wire. The Auto setting will automatically

detect a sync signal and set-up the HQView-3xx accordingly. This is set under the menu item

Synchronisation.

The DVI port EDID can be set to DVI only and HDMI. It defaults to DVI only, since some sources are

confused by the additional CEA blocks present in a HDMI port EDID.

When the OSD menu is off the test pattern can be toggled through by pressing the up and down keys of

the keypad. For unit control through a web browser or to set up a certain default test pattern a list box to

choose the pattern from is provided.

3.9.4. Display Mode

The “Display Mode” can be set to either Low Latency or Best Picture. In Best Picture optimum image

processing is applied, whereas in Low Latency mode the lowest latency is achieved. The flicker of

interlaced video is not suppressed totally for the latter setting. Thus it has the disadvantage of

conventional CRT TVs, but also their advantage of almost no delay in response, which is important for

applications such as gaming, simulation or imaging in medical treatment.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Optoma HQView-300 Series Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info