Bedienungsanleitung Oregon Scientific IB368 (Seite 15 von 19) (Englisch)

589257

Zoom out

Zoom in

Vorherige Seite

1/19

Nächste Seite

within a 30-meter range (approx. 100 feet) is nearby

whose radio frequency transmission signals jam with

your iBall’s signals.

To eliminate signal jamming, follow the procedures below

to set the RF mating function between the speaker and

transmitter dock.

NOTE The entire RF mating process must be completed

within 20 seconds in order for the speaker and transmitter

dock to function properly, otherwise the process has

likely timed out and will need to be restarted.

1. Disconnect all secondary audio sources or video

output devices from the transmitter dock although

you may choose to leave the iPod docked onto the

transmitter dock.

2. Leave the AC adapter connected to the transmitter

dock. If the adapter is not plugged in, connect it to

the transmitter dock.

3. Designate the speaker to start the RF mating

process. Plug in the speaker’s AC adapter if batteries

are not used.

4. Power on the speaker and from its control panel,

press and hold both the and buttons for

3 seconds.

5. Press the RF mating button located at the bottom

of the transmitter dock.

Once RF mating is successfully completed, the LCD

backlight lights up with status icons appearing that

indicate whether the iPod is docked onto the transmitter

dock.

 If iPod is not docked, appears.

 If iPod is docked, appears.

The LCD backlight on the

iBall speaker turns off (the

speaker itself remains on).

appears and blinks

during the RF mating

process.

1. Use a red-white-yellow audio cable and connect the

red-white connectors to the line-in jacks of the output

device. The yellow (composite video) connector

does not need to be connected.

2. Plug the other end of the cable (stereo connector)

to the transmitter dock line-out jack.

3. Use an S-Video cable and plug each end to the

respective video output device and transmitter dock

S-Video jacks.

4. From the iPod with color display, choose whether

to view photos individually or as a slideshow and if

the TV comes with speakers, select music to

playback. The iPod with color display play / pause

track and previous / next track or photo functions

are adjusted directly from the player itself.

NOTE Controlling iPod functions from the iPod itself

during a video connection does not influence what is

shown on the speaker’s LCD.

TIP Under both video connection scenarios, the speaker

can remain powered on and iPod music will playback.

But if the speaker is operating on batteries, turn off the

speaker to conserve power.

RECOGNIZING WIRELESS SIGNALS

The iBall speaker and transmitter dock is manufactured

preset to automatically recognize each other wirelessly

during operation through a process called “RF mating”.

However, there are certain occasions when signal

jamming can occur, for example when a second iBall

EU_IB368manual(eng)R12 8/31/2005, 3:51 PM14

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Oregon Scientific IB368 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Oregon Scientific IB368

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info