Bedienungsanleitung Oregon Scientific WMR300A (Seite 9 von 15) (Englisch)

677398

Zoom out

Zoom in

Vorherige Seite

1/15

Nächste Seite

NOTE

Heat index is only calculated when temperature is 80° F / 27°C or above.

To view wind chill:

• Press area repeatedly until WIND CHILL displays.

SUNRISE / SUNSET

NOTE

Make sure you input latitude and longitude of your location in area,

which affects the sunrise/sunset time.

NOTE

Excepting the latitude and longitude, daylight saving time setting also affects

sunrise and sunset (See Manually Set Clock).

You can view the sunrise or sunset time in

area.

•

Press SUNRISE/SUNSET area. displays on the top of the time display.

• Press to change the time display between 12hr/24hr format.

WIND

DIRECTION CALIBRATION

Before pairing a wind sensor, make sure the head of the wind vane of that sensor

point to the north while pressing KEY for 2 seconds in the transmitter box to calibrate

the direction. If the calibration is successful, red light ﬂashes once. You can use a

compass to look for an accurate direction of north if necessary.

However, if you are the user in North America, there are already 15°(degree)

variations existing between the true north and a compass reading of north. You

can consult your local observatory about this issue.

If it is difﬁcult to control the wind vane after installation, you can calibrate through

setting on main unit.

1. Make a compass approach to the wind vane.

2. Calculate the angle between the current direction

and the north direction.

3. Press

wind area to activate.

4. Press and hold

, and then

press or to calibrate

the angle value.

5. Press

again to conﬁrm setting.

For example, inputting the angle value that you

want to set as north. If current direction is 25

degree and you want to set it as north, then you

input 25 degree in the calibration mode. Once

you return to the idol mode, the direction reading

displays 0 degree, which is the north.

NOTE

You need to calibrate the wind sensor again if you want to relocate the sensor.

WIND SPEED / DIRECTION

To select wind display mode:

Press wind area to toggle between:

• GUST (Gust)

• AVG (Average)

To select wind speed unit:

Press to switch among:

• Knots (knots)

• Kilometres per hour (km/h)

• Miles per hour (mph)

• Metres per seconds (m/s)

The wind level is shown by a series of text icons:

LIGHT MODERATE STRONG STORM

2-8 mph

(3-13 km/h)

9-25 mph

(14-41 km/h)

26-54 mph

(42-87 km/h)

>55 mph

(>88 km/h)

To read the wind direction:

Status Wind Direction Indicator Meaning

GUST

Real-time wind direction

AVG

Real-time average wind direction

AVG

(Max 6 sets)

Wind direction of last 1 hour

RESET KEY

North

NOTE

The wind chill factor is based on the combined effects of temperature and

wind speed. Displayed wind chill is calculated solely from channel 1 thermometer

and humidity sensor.

BAROMETRIC PRESSURE

The altitude reﬂects distance from sea level at your position.

To set the altitude level compensation for the barometric readings:

1. Press

area to activate. displays next to the area and the tool bar

displays at the below of the screen.

2. Press the area until ALT displays on the screen. You are in altitude mode.

3. Press and hold

on the tool bar.

4. Press

or to edit. You can press to change the

altitude unit between M (Meter) and FEET (Feet) while editing.

5. Press

to conﬁrm or touch panel area (except tool bar/barometer

area) to conﬁrm.

6. After setting altitude, the new altitude setting will not be effective immediately.

The ALT icon ﬂashes and stops ﬂashing until the next pressure sampling. The

new altitude setting takes effect on the new pressure sampling.

NOTE

When altitude is set to 0 meter, the pressure reading is the local pressure.

If the altitude is set to the current location, the new pressure reading is an offset

pressure to the sea level.

To select the measurement unit for the barometer:

1. Press

barometer area to toggle between altitude and current barometer.

2. Press

to select inHg (inches of mercury) / mmHg (millimetres of

mercury) / mb (millibars per hectopascal) / hPa.

To view pressure trend:

The barometric pressure trend icons are based on recent sensor readings.

The trend lines are shown next to the pressure readings. The trend is shown

as follows:

Rising Steady Falling

RAINFALL

To select rainfall display mode:

Press rain area to toggle between:

• THIS HOUR (Hourly rainfall)

• RATE (Rain rate)

• ACCUM (Accumulated rainfall)

• PAST 24 hrs (Rainfall recorded in the past 24 hours)

To select the measurement unit for the rainfall:

Press to select between mm (millimeter) and in (inch).

To select the measurement unit for the rainfall rate:

Press to select between in/hr (inch per hour) and mm/hr (millimeter

per hour).

ACCUMULATED RAINFALL

To display accumulated rainfall:

Press rain area repeatedly until ACCUM display. (SINCE displays in the

clock area that displays the start date / time of rainfall recording simultaneously).

To reset SINCE time:

Press and hold

MEM to set current time as start of accumulated rainfall records.

The rainfall record is cleared and reset to 0.

BAR CHART

The bar chart simultaneously displays the data while you press on the

corresponding area.

To select chart display mode:

Press on the below areas to toggle among these chart displays.

• IN TEMP (Indoor temperature)

• IN HUM (Indoor humidity)

• OUT TEMP (Outdoor temperature)

• OUT HUM (Outdoor humidity)

• DEWPOINT (Dew point)

• HEAT INDEX (Heat index)

Oregon Scientific WMR300A Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info