Bedienungsanleitung Panasonic AG-DVC 20p (Seite 37 von 42) (Englisch)

597929

Zoom out

Zoom in

Vorherige Seite

1/42

Nächste Seite

Others

When normal playback cannot be performed even after the

head cleaning

One possible cause is that normal recording could not be

performed because the heads were dirty at the time of

recording. Clean the heads, and perform recording and

playback again. If normal playback can be performed, the

heads are clean. Before an important recording, be sure to

conduct a test recording to make sure that normal recording

can be performed.

≥If the heads become dirty soon after cleaning, the problem

may be attributable to the tape. If so, try another cassette.

≥During playback, the picture or sound may be interrupted

momentarily, but this is not a malfunction of the camera-

recorder. (One possible cause is that the playback is

interrupted by dirt or dust that momentarily adheres to the

heads.)

About the camera-recorder

≥When the camera-recorder is used for a long time, the

camera-recorder body becomes warm, but this is not a

malfunction.

Keep the camera-recorder away from magnetized

equipment such as a cellular phones, microwave ovens,

TVs, and video game equipment.

≥If you use the camera-recorder on or near a TV, images or

sounds may be disturbed due to electromagnetic wave

radiation.

≥Recordings on the tape may be damaged, or images may be

distorted, by strong magnetic fields created by speakers or

large motors.

≥Electromagnetic wave radiation generated by digital circuits

including microprocessor may adversely affect the camera-

recorder, causing the disturbance of images and sounds.

≥If the camera-recorder is affected by such equipment and

does not function properly, turn off the camera-recorder

power and detach the battery or AC adapter. Then, connect

the battery or AC adapter again and turn on the camera-

recorder power.

Do not use your camera-recorder near radio transmitters

or high-voltage cables.

≥If you record pictures near radio transmitters or high-voltage

cables, recorded images or sounds may be adversely

affected.

Do not spray insecticides or volatile chemicals onto the

camera-recorder.

≥If the camera-recorder is sprayed with such chemicals, the

camera-recorder body may become deformed and the

surface finish may peel off.

≥Do not keep rubber or plastic products in contact with the

camera-recorder for a long time.

When you use your camera-recorder in a sandy or dusty

place such as on a beach, do not let sand or fine dust get

into the body and terminals of the camera-recorder. Also,

protect the camera-recorder from getting wet.

≥Sand or dust may damage the camera-recorder or cassette.

(Care should be taken when inserting and removing a

cassette.)

≥If sea water splashes onto the camera-recorder, wet a soft

cloth with tap water, wring it well, and use it to wipe the

camera-recorder body carefully. Then, wipe it again

thoroughly with a soft dry cloth.

While carrying the camera-recorder, do not drop or bump

it.

≥A strong impact on the camera-recorder may break its

housing, causing it to malfunction.

Do not use benzine, paint thinner or alcohol for cleaning

the camera-recorder.

≥Before cleaning, detach the battery or pull out the AC mains

lead from the AC mains socket.

≥The camera-recorder body may be discolored and the surface

finish may peel off.

≥Wipe the camera-recorder with a soft dry cloth to remove dust

and fingerprints. To remove stubborn stains, wring well a cloth

that is soaked in a neutral detergent diluted with water and

wipe the camera-recorder with it. Afterwards, wipe it with a dry

cloth.

≥When you use a chemical dust cloth, follow the instructions.

Do not use this camera-recorder for surveillance purposes

or other business use.

≥If you use the camera-recorder for a long time, the internal

temperature increases and, consequently, this may cause

malfunction.

About the battery

The battery used in the camera-recorder is a rechargeable

lithium ion battery. This battery is susceptible to temperature

and humidity, and the effect of temperature increases with

increasing or decreasing temperature. In the low temperature

range, the fully charged indication may not appear, or the low

battery indication may appear about 5 minutes after the start of

use. At high temperature, moreover, the protection function

may work, disabling use of the camera-recorder.

Be sure to detach the battery after use

≥If the battery is left attached to the camera-recorder, a minute

amount of current is consumed even when the camera-

recorder power is [OFF]. If the battery is left attached to the

camera-recorder for a long time, over-discharge takes place.

The battery may become unusable after it is charged.

Prepare spare batteries when going out for recording.

≥Prepare batteries appropriate to 3 to 4 times the period during

you want to record pictures in. In cold places such as a ski

resort, the period during which you can record pictures is

shortened.

≥When you travel, do not forget to bring an AC adapter so that

you can recharge the batteries at your destination.

If you drop the battery accidentally, check to see if the

terminals are deformed.

≥Attaching a deformed battery to the camera-recorder or AC

adapter may damage the camera-recorder or AC adapter.

After use, be sure to take the cassette out and detach the

battery from the camera-recorder or pull out the AC mains

lead from AC mains socket.

≥The battery should be stored in a cool place free from

humidity, with as constant temperature as possible.

(Recommended temperature: 15 oC (59 oF) to 25 oC (77 oF),

Recommended humidity: 40% to 60%)

≥Extremely high temperatures or low temperatures will shorten

the life of the battery.

≥If the battery is kept in a high-temperature, high-humidity, or

oily-smoky places, the terminals may rust and cause

malfunctions.

≥To store the battery for a long period of time, we recommend

you charge it once every year and store it again after you

have completely used up the charged capacity.

≥Dust and other matter attached to the battery terminals should

be removed.

DVC20_Eng.book 37 ページ２００６年４月６日　木曜日　午前１０時１０分

Panasonic AG-DVC 20p Seite 37

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info