Bedienungsanleitung Panasonic AG-DVC 20p (Seite 35 von 42) (Englisch)

597929

Zoom out

Zoom in

Vorherige Seite

1/42

Nächste Seite

Others

Recording

1: Recording does not start although power is supplied to

the camera-recorder and the cassette is correctly

inserted.

• Is the accidental erasure prevention slider on the cassette

open? If it is open (set to [SAVE]), recording cannot be

performed. (

-12-)

• Is the tape wound to the end? Insert a new cassette.

• Is the recording mode set? When in the playback mode,

recording cannot be performed. (

-19-)

• Has condensation occurred? No operation other than

cassette removal can be performed when condensation

occurs. Wait until the condensation indication disappears.

(

-36-)

• Is the cassette cover open? If the cover is open, the camera-

recorder may not operate normally. Close the cassette cover.

(

-12-)

2: A cassette cannot be inserted.

• Has condensation occurred? Wait until the condensation

indication disappears.

3: Auto focus function does not work.

• Is manual focus mode selected? If auto focus mode is

selected, focus is automatically adjusted.

• There are some recording subjects and surroundings for

which the auto focus does not operate correctly. (

-39-) If so,

use the manual focus mode to adjust the focus. (

-25-)

• Is the color night view function set? When the color night

view function is working, focusing shifts into the manual

mode.

Indications

1: A sentence is displayed in red or yellow in the screen

center.

• Read the contents and respond to them. (

-33-)

2: The time code becomes inaccurate.

0 The time code indication counter may not be constant in the

reversed slow-motion playback, but this is not a malfunction.

3: The remaining tape time indication disappears.

• The remaining tape time indication may disappear

temporarily during frame-by-frame playback or other

operation. If you continue ordinary recording or playback, the

indication is restored.

4: The remaining tape time Indication does not match the

actual remaining tape time.

• If scenes of less than 15 seconds are continuously recorded,

the remaining tape time cannot be correctly displayed.

• In some cases, the remaining tape time indication may show

remaining tape time that is 2 to 3 minutes shorter than the

actual remaining tape time.

5: A function indication such as mode indication,

remaining tape time indication, or time code indication is

not shown.

• If you set [SETUP] >> [DISPLAY] >> [OFF], indications other

than the tape running condition, warning, and date

indications disappear.

Playback (Sound)

1: Sound is not played back from the built-in speaker of the

camera-recorder or the headphones.

0 Is the volume too low? During playback, push the [W/T] lever

to display the volume indication and adjust it. (

-26-)

2: Different sounds are reproduced at the same time.

• Have you set [SETUP] >> [12bit AUDIO] >> [MIX]? If you set

[AUDIO REC] >> [12bit] and dub audio to a recorded tape,

you can hear the sound on recording and the sound dubbed

at a later time. To hear the sounds separately, set to [ST1] or

[ST2]. (

-30-)

• Have you set [SETUP] >> [AUDIO OUT] >> [STEREO] and

reproduced a picture containing the main sound and sub

sound? Set to [L] to hear main sound, and set to [R] to hear

the sub sound. (

-32-)

3: Audio dubbing cannot be performed.

• Is the accidental erasure prevention slider on the cassette

open? If it is open (set to [SAVE]), audio dubbing cannot be

performed. (

-12-)

• Are you attempting to edit a tape portion that was recorded in

LP mode? LP mode does not allow audio dubbing. (

-19-)

4: The original sound was erased when audio dubbing was

performed.

• If you perform audio dubbing on a recording made in [16bit]

mode, the original sound will be erased. If you wish to

preserve the original sound, be sure to select [12bit] mode

when recording.

5: Sounds cannot be played back.

• Although a cassette with no audio dubbing is being played,

have you set [SETUP] >> [12bit AUDIO] >> [ST2]? To play

back a cassette with no audio dubbing, set [12bit AUDIO] >>

[ST1]. (

-30-)

• Is the variable speed search function working? Press the

[VAR. SEARCH] button on the remote control to cancel the

variable speed search function. (

-27-)

Playback (Pictures)

1: Mosaic-pattern noise appears on images during cue or

review playback.

• This phenomenon is characteristic of digital video systems. It

is not a malfunction.

2: Horizontal stripes appear on images during cue and

review playback.

• Horizontal stripes may appear depending on the scene, but

this is not a malfunction.

3: Although the camera-recorder is correctly connected to

a TV, playback images cannot be seen.

• Have you selected video input on the TV? Please read the

operating instructions of your TV and select the channel that

matches the input terminals used for the connection.

4: Playback picture is not clear.

• Are the heads of the camera-recorder dirty? If the heads are

dirty, playback image cannot be clear. Clean the heads by

using the head cleaner for digital video. (

-36-)

• If the terminal for the AV cable is soiled, noises may appear

on the screen. Wipe the soil off the terminal with a soft cloth,

and then connect the cable to the AV terminal.

• Is a picture containing a copyright protection signal (copy

guard) being recorded? When a protected picture is played

back by the camera-recorder, mosaic-like patterns appear on

the picture.

DVC20_Eng.book 35 ページ２００６年４月６日　木曜日　午前１０時１０分

Panasonic AG-DVC 20p Seite 35

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info