Bedienungsanleitung Panasonic AG-HPX 300P (Seite 144 von 166) (Englisch)

597937

144

Zoom out

Zoom in

Vorherige Seite

1/166

Nächste Seite

144

Chapter 8 Connecting to External Devices

A TYPE S and P2 STORE hard disk drive allows you to write

back data in card units.

Format the P2 card to prepare for write back.

Switch to the USB host mode.

For details, refer to [Switching to USB Host Mode]

(page 140).

Connect a hard disk drive via USB.

Insert the P2 card to which data will be written

back to.

Press the THUMBNAIL button, select HDD 

EXPLORE from the thumbnail menu, move to

the partition with the data that will be written

and press the SET button.

Select OPERATION  IMPORT  ALL from

the thumbnail menu and select a slot with an

empty P2 card for writing to.

Select YES.

• This starts the write process to the card.

• COPY COMPLETED! announces the end of the write

back process.

 NOTE

• It is not possible to import data by the partition between P2

cards with different model numbers. Import data in clip units

from cards with a different model number.

• To turn off the verify phase in a write back operation, select

HDD  SETUP in the thumbnail menu and set VERIFY to OFF.

This speeds up the write back time but does not verify the

written data.

• When a clip is written back to a P2 card it was not originally

on may make that clip an incomplete clip. Should this happen,

reconnect it.

Refer to [Reconnection of Incomplete Clips] (page 109).

Hard disk drive precautions

• Use hard disk drives (including P2 STORE (AJ-

PCS060G)) according to the following conditions.

- Operate hard disk drives within their operating

speciﬁcations (temperature, etc.).

- Do not use hard disk drives in locations that are

unstable or exposed to vibration.

• Some hard disk drives may not operate normally.

• SATA (serial ATA) or PATA (parallel ATA) interface hard

disk drives connected using a USB conversion cable may

not be recognized.

• Use hard disk drives with plenty of capacity for copying

data.

• During formatting and copying, do not disconnect cables

or remove a P2 card that is involved in these activities

and do not power off this camera and the hard disk drive,

as the camera and hard disk drive will otherwise have to

be rebooted.

• A hard disk drive is a precision instrument whose

read and write functions may fail in some operating

environments.

• Please note that Panasonic accepts no liability

whatsoever for data loss or other losses either direct or

indirect arising from hard disk damage or other defects.

• When data from this camera is copied to a hard disk and

is edited on another computer, the data may no longer

work in this unit and the hard disk data may become

corrupted.

• Use of the drive mount converter distributed by the below

URL allows you to mount speciﬁc folders when a hard

disk drive is connected.

https://eww.pavc.panasonic.co.jp/pro-av/

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic AG-HPX 300P Seite 144

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info