Bedienungsanleitung Panasonic AJ-HDX900 (Seite 16 von 134) (Englisch)

99987

Zoom out

Zoom in

Vorherige Seite

1/134

Nächste Seite

= VIDEO OUT OUTPUT SEL (output signal selection)

switch

This is used to select the signals output from the VIDEO

OUT connector.

VTR : In the recording or other EE mode, the camera

images are output from the connectors; in the

playback mode, it is the VTR’s playback signals

which are output.

CAM : The camera images are output at all times.

Furthermore, the audio output signals are synchronized

with the video signals as well.

For details on the video output, refer to “4-8-1 Settings of

signals output from VIDEO OUT connector.”

> VIDEO OUT CHARACTER switch

This is used to control the superimposing of the

characters onto the images which are output from the

VIDEO OUT connector.

ON : The characters are superimposed onto the images.

OFF : The characters are not superimposed onto the

images.

For details on the character types, refer to “4-8-1 Settings

of signals output from VIDEO OUT connector.”

? VIDEO OUT (signal switching) switch

This switch switches the modes of output signals from the

VIDEO OUT connector.

HD SDI: To output HD SDI signals

SD SDI: To output the down-converted SD SDI signals

VBS: To output the down-converted composite video

signals

@ VIDEO OUT connector

This is an output connector for video signals. Video

signals linked to the setting of the VIDEO OUT switch (=,

>, ?) are output from here.

A REMOTE (remote control) connector

The AJ-RC10G remote control unit (optional accessory) is

connected here.

B MON OUT (Monitor) connector

This is the connector for outputting the video signal which

is used for monitoring.

HD SDI signals or analog HD Y signals are output from

here.

Whether characters are to be superimposed onto the

images output from the VIDEO OUT connector can be

selected separately using the internal menu.

For details, refer to “4-8-2 Settings for signals output from

the MON OUT connector.”

C GENLOCK IN connector

The HD Y reference signal is supplied to this connector

when the camera unit is to be gen-locked or the time code

is to be externally locked.

Composite video signals may be input as the reference

signal instead but, in this case, the H phase cannot be

adjusted. Also, it is not possible to externally lock the sub

carrier of the unit’s down-converter output (composite

video signal).

O Returned video images can be confirmed in the

viewfinder screen by entering HD-Y signals.

D EJECT button

This is pressed to insert or eject the cassette.

E STOP button

This is pressed to stop the tape travel.

F PLAY/PAUSE button

This is pressed to view the playback picture on the

viewfinder screen or using a color video monitor. The

button’s lamp comes on during playback.

When it is pressed during playback, the unit is set to

pause in the playback mode (PLAY PAUSE), and the

button’s lamp flashes. If the unit is left in the pause mode

for two minutes, it automatically changes to the stop

(STOP) mode.

G REW (rewind) button and lamp

When this button is pressed during stop, the tape is

reviewed at high speed. Its lamp lights at this time.

When it is pressed during playback or pause, the tape is

reviewed at approximately 4 times the normal tape speed.

Both the PLAY lamp and REW lamp light at this time.

During the jump operation, the REW lamp flashes.

H FF (fast forward) button and lamp

When this button is pressed during stop, the tape is cued

at high speed. Its lamp lights at this time.

When it is pressed during playback or pause, the tape is

cued at approximately 4 times the normal tape speed.

Both the PLAY lamp and FF lamp light at this time.

I EMERGENCY screw (inside rubber cap)

If the cassette does not eject even when the EJECT

button is pressed, use a screwdriver or similar implement

to push and turn the EMERGENCY screw at the same

time: this will cause the cassette to be ejected.

For details, refer to “6-3-3 Emergency eject.”

Chapter 2 Parts and their functions

(continued)

01.AJ-HDX900_P_E(VQT0X86)_E 06.6.27 10:08 AM ページ16

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic AJ-HDX900 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info