Bedienungsanleitung Panasonic AJ-SPX 800P (Seite 14 von 116) (Englisch)

597960

Zoom out

Zoom in

Vorherige Seite

1/116

Nächste Seite

OUTPUT/AUTO KNEE selector switch

Used to select the video signals sent from the camera unit to

the memory, viewfinder and video monitor.

CAM. AUTO KNEE ON:

Video being recorded through the camera is sent with the

auto knee circuit activated.

CAM. AUTO KNEE OFF:

Video being recorded through the camera is sent in

manual knee mode.

BARS:

Color bar signal is output. The auto knee circuit does not

work.

You can select between four types of color bar signal. For

more information, see [8-5-5 SW MODE].

WHITE BAL (white balance memory selector)

switch

Used to select the white balance adjustment method.

PRST: Use this when you have no time to adjust the

white balance.

The value for the white balance is factory-set to

3200 K.

It can be changed to any color temperature using

a menu option. For more information, see [4-8-5

Manually setting the color temperature].

A or B: Pressing the AUTO W/B BAL Switch toward

[AWB] automatically adjusts the white balance,

saving the adjusted value in Memory A or B. For

more information, see [4-1-1 Adjusting the White

Balance].

Your video camera-recorder is factory-set to save the

adjusted value. Through a menu option, the auto-tracking

white balance (ATW) can be assigned to B, or desired color

temperatures can be assigned to A and B.

For more information, see [4-1-1 Adjusting the White

Balance].

MODE CHECK button

Each press of this button changes the screen type in the

viewfinder in the following order: STATUS, !LED,

FUNCTION, AUDIO.

This does not affect the signal output from the camera.

MARKER SELECT button

This button selects the marker information indicated on the

viewfinder screen. It switches between two marker

information indications, which can be selected using a menu

option. Pressing this button once switches the indicated

marker information from A (Marker A) to B (Marker B), and

pressing again switches B to OFF (no marker). When the

power is turned on, the last selected indication before

power-down appears.

For more information, see [4-7-6 Marker Check Screen

Displays (MARKER SELECT button function)].

SYNCHRO SCAN ADJUSTMENT buttons

These buttons are enabled when the shutter switch is

positioned at [ON] and synchro scan is selected.

They are used to adjust the speed of the synchro scan.

The

–ޓbutton decreases shutter speed; the + button

increases shutter speed.

If you shoot a PC monitor, for example, you should adjust

shutter speed so that the horizontal bars in the viewfinder

will produce less noise.

/ Shooting and Recording/Playback Function

Section (recording)

REC START/STOP button

Pressing this button starts recording, pressing again stops

recording.

This button has the same function as the REC button on

the handle and the VTR button at the lens.

SHOT MARK button

Pressing this button while recording adds a shot mark to the

thumbnail of that clip. This button also adds a shot mark to

any thumbnail selected on the LCD monitor.

For more information on shot marks, see [3-9 Shot Mark

Function].

SAVE ON/OFF switch

Used to select the power supply method for each output

section.

ON: The output selected through the menu option

SAVE SW is power-saved. This option can be

found on the OPTION MODE screen on the

SYSTEM SETTINGS page.

OFF: Power saving is canceled.

<Note>

During recording, this switch produces no effect. The power

supply method is switched after recording is finished.

VIDEO OUT CHARACTER switch

This switch controls the superimposition of characters onto

the video output from the VIDEO OUT connector.

ON: Characters are superimposed.

OFF: Characters are not superimposed.

For types of characters, see [4-9-2 Selecting Video Output

Signals].

Auto Knee function

Usually, when you adjust levels to shoot people or scenery against a

strongly lit background, the background will be totally whited-out, with

buildings and other objects blurred. In this case, the auto knee function

reproduces the background clearly. This function is effective when:

• The subject is a person positioned in the shade under a clear sky.

• The subject is a person inside a car or building, and you also want to

capture the background visible through a window.

• The subject is a high-contrast scene.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic AJ-SPX 800P Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info