Bedienungsanleitung Panasonic DMP-BD30 (Seite 29 von 36) (Englisch)

62790

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

RQT9038

HDMI connections (continued) Page

Card

Other difficulties with playback

When other Panasonic products respond to this remote control

Change the remote control code on the main unit and the remote control (the two must match) if you place other Panasonic products close

together.

When playing DVD-Video using

progressive output, one part of

the picture momentarily

appears to be doubled up.

≥When you use the HDMI AV OUT terminal for video output, follow the steps below for setting.

1 Connect this unit to the TV with any cable except the HDMI cable.

2 When you connect with the Component Video cable, set “HDMI Video Mode” to “Off” and

“Component Resolution” to “576i/480i” in the Setup menu.

No sound.

Low volume.

Distorted sound.

Cannot hear the desired audio

type.

≥Audio may not be heard when more than 4 devices are connected with HDMI cables.

Reduce the number of connected devices.

≥The sound effects will not work when the bitstream signal is output from the HDMI AV OUT

terminal or the DIGITAL AUDIO OUT terminal.

≥To output audio from a device connected with an HDMI cable, set “HDMI Audio Output” to

“On” in the Setup menu.

≥If the sound is distorted when the unit is connected to an amplifier/receiver with an HDMI

cable, adjust the settings in “Speaker” in the Setup menu to match the connection.

≥Depending on the connected equipment, the sound may be distorted if this unit is connected

with an HDMI cable.

≥When “BD-Video Secondary Audio” is set to “On”, Dolby Digital Plus, Dolby TrueHD, and

DTS-HD are converted to 48 kHz Dolby Digital and output. LPCM 7.1 channel audio is

converted to 5.1 channel audio. In this case, set the “BD-Video Secondary Audio” to “Off”.

—

The capacity of the SD card

decreased.

≥When a BD-Video that supports the virtual package is used, and an SD card is in the slot,

data may be written to the SD card. Erase the data by using “BD-Video Data Erase”, format

the card or use a new card.

MPEG-2 motion pictures and

music on an SD card cannot be

played.

≥Data that can be played from an SD card are AVCHD and JPEG data.

The contents of the card

cannot be read.

≥The card is not compatible or the contents on the card may be damaged.

≥Turn off and then turn on the unit again.

—

Audio and video momentarily

pause.

≥This occurs between playlist chapters or scenes ([AVCHD]).

≥When playing a title recorded on both layers, the unit automatically switches between layers

and plays the title in the same way as a normal programme. However, video and audio may

momentarily cut out when the unit is switching layers.

—

BD-Video or DVD-Video is not

played.

≥Ensure the disc is for the correct BD-Video region code or DVD-Video region number, and is

not defective.

≥You have set a ratings level to limit BD-Video or DVD-Video play. Change this setting.

≥Some BD-Video can only be output with HDMI.

Cover

—

Picture-in-picture is not played

with BD-Video.

≥Confirm whether the disc supports picture-in-picture.

—

The virtual package

is not played with BD-Video.

≥Confirm whether the disc supports the virtual package.

≥The inserted SD card does not have sufficient available capacity.

≥The SD card is write-protected.

≥Sub contents copied to an SD card are provided by the disc producer as a part of the

BD-Video content. Even if you record images and audio onto an SD card, it cannot be played

as a virtual package.

—

Alternative soundtrack and

subtitles cannot be selected.

≥The languages are not recorded on the disc.

≥You may not be able to use the on-screen menu to change the soundtrack and subtitles on

some discs. Use the disc’s menus to make changes.

—

11, 13

No subtitles. ≥Subtitles are not recorded on the disc.

≥Turn the subtitles on. Set “Subtitle” on the on-screen menu to “On”.

—

Angle cannot be changed. ≥Angles can only be changed during scenes where different angles are recorded. —

The resume play function does

not work.

≥Memorized positions are cancelled when

– pressing [∫] several times.

– opening the disc tray.

≥The resume play function may not work depending on the disc.

—

1 Press [SETUP].

2 Press [3, 4] to select “General” and press [OK].

3 Press [3, 4] to select “Remote Control” and

press [OK].

4 Press [3, 4] to select the code (1, 2, or 3) and

press [OK].

To change the code on the remote control

While pressing [OK], press and hold the

numbered button ([1], [2] or [3]) for more than

5 seconds.

6 Press [OK].

NOTE

When the following indicator

appears on the unit’s display and

you are unable to operate the unit

The unit’s remote control code

Press and hold [OK] and the

indicated number button at the same

time for more than 5 seconds.

Set Code 1

Set Code 2

Set Code 3

Remote Control

Press

[

]

and

[

]

together

for more than 5 seconds on

the remote.

Reference

DMP-BD30EG-RQT9038_eng.book 29 ページ２００８年１月２６日　土曜日　午後７時４９分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic DMP-BD30 Seite 29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic DMP-BD30

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info