Bedienungsanleitung Panasonic DMP-BD30 (Seite 30 von 36) (Englisch)

62790

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

RQT9038

Messages

The following messages or service numbers appear on the television or unit’s display when something unusual is detected during startup and

use.

Disc and card

handling

Clean discs

Wipe with a damp cloth and then wipe dry.

Disc and card handling precautions

≥Handle discs by the edges to avoid inadvertent scratches or

fingerprints on the disc.

≥Do not attach labels or stickers to discs (This may cause disc

warping, rendering it unusable).

≥Do not write on the label side with a ball-point pen or other writing

instrument.

≥Do not use record cleaning sprays, benzine, thinner, static

electricity prevention liquids or any other solvent.

≥Do not use scratch-proof protectors or covers.

≥Clean any dust, water, or foreign matter from the terminals on the

rear side of the card.

≥Do not use the following discs:

– Discs with exposed adhesive from removed stickers or labels

(rented discs etc).

– Discs that are badly warped or cracked.

– Irregularly shaped discs, such as heart shapes.

Maintenance

Clean this unit with a soft, dry cloth

≥Never use alcohol, paint thinner or benzine to clean this unit.

≥Before using chemically treated cloth, carefully read the

instructions that came with the cloth.

Observe the following points to ensure continued listening and

viewing pleasure.

Dust and dirt may adhere to the unit’s lens over time, making it

impossible to play discs.

Use the lens cleaner (not included) about once every year,

depending on frequency of use and the operating environment.

Carefully read the lens cleaner’s instructions before use.

On the television Page

Authorisation Error. ≥You are trying to play the DivX VOD content that was purchased with a different

registration code. You cannot play the content on this unit.

Cannot play. ≥You inserted an incompatible disc. 4, 5

Cannot play on this unit. ≥You tried to play a non-compatible image.

≥Confirm “SD” on the unit’s display is not blinking and re-insert the card.

—

No disc ≥The disc may be upside down. —

Rental Expired. ≥The DivX VOD content has zero remaining plays. You cannot play it. 16

$ This operation is currently

disabled.

≥The operation is prohibited by the unit or disc.

—

On the unit’s display

F99 ≥The unit fails to operate properly. Press [Í/I] on the main unit to switch the unit to standby

for 3 seconds. Now press [Í/I] on the main unit again to turn the unit on.

—

HDMI ONLY ≥Some BD-Video discs can only be output with HDMI. —

No PLAY ≥There is a viewing restriction on a BD-Video or DVD-Video. 22

No READ ≥The disc is dirty or badly scratched. The unit cannot play. —

PLEASE WAIT ≥Displayed when the unit is started and turned off. This is not a malfunction.

≥The unit is carrying out its recovery process. You cannot operate the unit while “PLEASE

WAIT” is displayed.

—

SET 

(“  ” stands for a number.)

≥The remote control and main unit are using different codes. Change the code on the

remote control.

Press and hold [OK] and the indicated number button at the same

time for more than 5 seconds.

UNFORMAT ≥You inserted an unformatted DVD-RAM, DVD-RW, +RW, an unused +R, +R DL or

DVD-RW (DVD-Video format).

—

UNSUPPORT ≥You have inserted a disc the unit cannot play. 4, 5

U59 ≥The unit is hot.

The unit switches to standby for safety reasons. Wait for about 30 minutes until the

message disappears.

Select a position with good ventilation when installing the unit. Do not block the cooling fan

on the rear of the unit.

—

U72

U73

≥The HDMI connection acts unusually.

– The connected equipment is not HDMI compatible.

– Please use HDMI cables that have the HDMI logo (as shown on the cover).

– The HDMI cable is damaged.

—

H or F ≥There is something unusual. (The service number displayed after H and F depends on the

unit’s condition.)

≥Check the unit using the troubleshooting guide. If the service number does not disappear,

do the following.

1 Disconnect the plug from the household mains socket wait a few seconds, then

reconnect it.

2 Press [Í/I] to turn the power on. (The unit may be fixed.)

If the service number does not disappear despite doing the above, request service from

the dealer. Inform the dealer of the service number when requesting service.

—

27–29

DO NOT

Lens cleaner: RP-CL720E

≥This lens cleaner is not for sale in Garmany and may not be for

sale depending on the region.

≥This lens cleaner is sold as specific for DIGA, but can be used

without problem on this unit as well.

DMP-BD30EG-RQT9038_eng.book 30 ページ２００８年１月２６日　土曜日　午後７時４９分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic DMP-BD30 Seite 30

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic DMP-BD30

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info