Bedienungsanleitung Panasonic DMP-BD60 (Seite 40 von 52) (Englisch)

502343

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

RQT9378

Messages

The following messages or service numbers appear on the television or unit’s display when something unusual is detected during startup and use.

On the television Page

Authorization Error

This unit is not authorized

to play this title.

≥ [DivX]: You are trying to play the DivX VOD content that was purchased with a

different registration code. You cannot play the content on this unit.

Cannot play. ≥You inserted an incompatible disc (Discs recorded in PAL video, etc.). 6, 7

Cannot display on this unit. ≥You tried to play a non-compatible image.

≥Confirm “SD” on the unit’s display is not blinking and re-insert the card.

7, 38

—

No disc is inserted. ≥The disc may be upside down. —

Rental Expired. ≥ [DivX]: The DivX VOD content has zero remaining plays. You cannot play it. 26

$ This operation is not

available.

≥Some operations are unsupported by the unit. For example;

–

[BD-V]

: During playback, reverse slow-motion or reverse frame-by-frame is not possible.

$ This operation is

prohibited by this disc.

≥Depending on the disc, you may not be able to perform search or skip when film

previews and warning screens are being played back.

Cannot connect.

Please check the

connection of the LAN

cable.

≥When a hub is used but its Link lamp does not light up, check the cable

connection, LAN terminal connection, cable itself (a cross over cable may be

used by mistake), etc.

IP address is not set. ≥The “IP Address” in “IP Address/DNS Settings” is “---. ---. ---. ---”. Set the “IP

Address”, “Subnet Mask”, and “Default Gateway”. (Select the automatic address

acquisition if necessary.)

Cannot obtain IP address

using DHCP.

Please check the

connection or router

settings.

≥If you use a hub, then check the connection between the hub and the router.

–Use the UPLINK port of the hub to connect to a router.

–Check whether or not the hub’s Link lamp lights up. If it does not light up, then

check the cable connection, LAN terminal connection, cable itself (a cross over

cable may be used by mistake), etc.

≥If the above conditions are OK, then the router may not operate in DHCP mode.

Check the router settings and operation. You may reset the router to restore it to

normal.

This IP address is already in

use.

Please check the IP address

setting.

≥This unit’s IP address is used by another device. Check the IP addresses of this

unit, personal computers, and routers, etc. If necessary, reconfigure them to

avoid IP addresses from being duplicated.

—

Unable to perform

Connection Test.

Please try again.

≥Turn the unit off. Remove the power cord and reconnect it and try again. If the

same symptom persists, then consult your dealer.

—

IP address not set correctly.

Connection Test was

unsuccessful. No reply

from host.

Please check the

connection or router

settings.

≥If you use a hub, then check the connection between the hub and the router.

–Use the UPLINK port of the hub to connect to a router.

–If the hub’s Link lamp does not light up, then check the cable connection, LAN

terminal connection, cable itself (a cross over cable may have been used by

mistake), etc.

≥Check the “IP Address”, “Subnet Mask”, and “Default Gateway” in the “IP

Address/DNS Settings”.

≥If the MAC address information is required, then press [SETUP] to display the

“Network” menu.

17, 35

Network connection

refused.

Please confirm Setup

“BD-Live Internet Access.”

≥When you set “BD-Live Internet Access” to “Allow (Limited)” and play BD-Live

contents which do not have a content owner certificate, the Internet access of the

content is not allowed. If you allow the content to connect to Internet, set “BD-Live

Internet Access” to “Allow (ALL)”.

Unable to check for latest

firmware version.

Please try again later.

≥The firmware download server is currently unavailable. Please try again later. —

High Clarity Sound is

effective.

Analog video output is

turned off when

playback starts.

≥“High Clarity Sound” in setup menu is set to “Enable”, and “High Clarity Sound” in

on-screen menu is set to “On”.

31, 33

RQT9378~Body_mst.fm 40 ページ２００８年１２月２５日　木曜日　午後３時２３分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic DMP-BD60 Seite 40

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic DMP-BD60

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info