Bedienungsanleitung Panasonic DMP-BD901 (Seite 28 von 36) (Englisch)

546107

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

SQT0108

The TV screen turns black.

¾ When “24p Output” is set to “On”, HDMI

authentication takes place and a black screen

is displayed.

This unit does not recognize the USB

connection correctly.

¾ Disconnect and re-connect the USB cable. If

it still does not recognize the connection, turn

this unit off and on again.

¾ USB devices may not be recognized by this

unit when connected using the following :

– a USB hub

– a USB extension cable other than the

supplied with the Wireless LAN Adaptor

DY-WL5 (optional)

¾ If you connect USB HDD to this unit, use the

USB cable that is supplied with the HDD.

The images from this unit do not appear on

the TV.

Picture is distorted.

¾ An incorrect resolution is selected in “HDMI

Resolution”. Reset the setting as follows:

1 Turn the unit on.

2 Press and hold [OK], the yellow button and

the blue button on the remote control at the

same time for more than 5 seconds.

– POWER LED starts to flash.

3 Press [8] and the blue button on the remote

control at the same time for more than

5 seconds.

Set the item again. (> 22)

– When Dolby Digital Plus, Dolby TrueHD,

and DTS-HD

audio are not output properly,

select “Yes” in “Restore Default Settings”

(> 26) and make proper settings.

Video is not output in high-definition.

¾ Confirm that “HDMI Resolution” in the Setup

menu is set properly. (> 22)

No subtitles.

¾ When progressive output is on, closed

captions/subtitles cannot be displayed.

The subtitles overlap closed captions

recorded on discs.

¾ Turn off the subtitles or the closed captions.

(> 20, 23)

Closed captions are not displayed.

¾ Confirm that the source content supports CC.

¾ Confirm the “Closed Caption Display” is set to

“On”. (> 21, 23)

¾ Change the “Closed Caption Type” setting.

(> 21, 23)

¾ Confirm the “Analog CC” or “Digital CC” is set

properly (> 21, 23).

A black band is displayed around the edge of

the screen.

The aspect ratio of the screen is abnormal.

¾ Confirm the “TV Aspect” is set properly.

(> 25)

¾ Adjust the aspect setting on the TV.

Cannot hear the desired audio type.

¾ Check the connections and the “Digital Audio

Output” settings. (> 9, 23)

Disc cannot be played.

¾ The disc is dirty. (> 5)

¾ The disc is not finalized. (> 7)

¾ Confirm the “Mixed Data Disc Option” is set

properly. (> 25)

Still pictures (JPEG) do not play back

normally.

¾ The images that were edited on the PC, such

as Progressive JPEG, etc., may not be played

back.

I can’t play back BD-Live.

¾ Confirm that this unit is connected to the

broadband Internet. (> 10)

¾ Connect this unit to the network by a wired

connection.

¾ Confirm the “BD-Live Internet Access”

settings. (> 24)

¾ Confirm a USB device is connected to the

USB port. (> 13)

Picture

Audio

Playback

DMP-BD91_81_SQT0108_eng.book 28 ページ２０１３年１２月３日　火曜日　午前１０時５０分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic DMP-BD901 Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info