Bedienungsanleitung Panasonic DMPBD80 (Seite 39 von 48) (Englisch)

602973

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

RQT9401

Displays Page

TV screen and video

The display is dim. ≥Change “FL Display” in the Setup menu. 30

The elapsed time displayed is

actually less than the play time.

≥The displayed play time is converted from the number of frames at 29.97 frames (equal to

0.999 seconds) to one second. There will be a slight difference between the time displayed

and the actual elapsed time (e.g., actual one-hour elapsed time may display as

approximately 59 minutes 56 seconds).

—

The images from this unit do

not appear on the television.

Picture is distorted.

≥Make sure that the television is connected to the VIDEO OUT terminal, COMPONENT

VIDEO OUT terminals or HDMI AV OUT terminal on this unit.

≥Make sure that the television’s input setting (e.g., AV 1) is correct.

≥

An incorrect resolution is selected in “Component Resolution”, when the television is connected to

COMPONENT VIDEO OUT

terminals. While stopped, press and hold [

∫

]

and [

](PLAY)

on the

main unit at the same time for more than 5 seconds to cancel this setting. Set the item again.

≥If “24p Output” is set to “On” when the unit is connected to a TV through any terminal other

than HDMI, images may not display properly. In this case, set “24p Output” to “Off”.

≥The unit and television are using different video systems. While stopped, keep pressing [∫]

and [< OPEN/CLOSE] on the main unit for 5 or more seconds. The system switches from

PAL to

NTSC

or vice versa.

≥The system used on the disc doesn’t match your television.

– PAL discs cannot be correctly viewed on an NTSC television.

– This unit can convert NTSC signals to PAL60 for viewing on a PAL television (“NTSC

Contents Output” in the “Picture”).

≥[DivX] Images may not be output due to how files were created.

8, 9

—

Played back image is distorted

or does not playback correctly.

([AVCHD])

≥High definition video (transfer rate of 18 Mbps or faster) cannot be played back correctly if it

was recorded on a DVD compatible to double speed or slower.

—

Picture stops. ≥[DivX] Picture may stop if the DivX files are greater than 2 GB. —

The screen changes

automatically.

≥When the “Screen Saver Function” in the Setup menu is set to “On”, the display may return to

the screen saver mode automatically if there is no operation for 10 minutes or more.

Video is not output.

≥An image is not output from the COMPONENT VIDEO OUT terminal or the VIDEO OUT

terminal when the “High Clarity Sound” is enabled. Set the “High Clarity Sound” in the

on-screen menu to “Off” to use the COMPONENT VIDEO OUT terminal or the VIDEO OUT

terminal.

Video is not output in high

definition.

≥High definition video cannot be output through the VIDEO OUT terminal.

≥Confirm that the “HDMI Video Mode”, “HDMI Video Format”, and “Component Resolution” in

the Setup menu are set properly.

≥The video output resolution is restricted to “576p/480p” when DVD-Video discs, DivX and

BD-Video discs recorded at a rate of 50 field per second are output from the COMPONENT

VIDEO OUT terminals.

—

Status messages do not appear.

≥Select “Automatic” in “On-Screen Messages” in the Setup menu. 30

The 4:3 aspect ratio picture

expands left and right.

Screen size is wrong.

≥Use the television to change the aspect. Refer to your television’s operating instructions.

≥When using a component video cable, set “Progressive” to “Video”. If the situation is not

restored after that, set “TV Aspect” to “4:3 Pan & Scan”.

—

27, 31

There is a lot of after-image

when playing video.

≥Turn “3D NR” or “Integrated NR” off if it is on.

There is no apparent change in

picture quality when adjusted

with the “Picture” menu in the

on-screen menu.

≥The effect is less perceivable with some types of video.

—

The masked-off area is masked

in gray.

≥If the “Screen Saver Function” in the Setup menu is set to “Off”, the masked-off area is

displayed in black.

Still pictures (JPEG) do not

playback normally.

≥The images that were edited on the PC, such as Progressive JPEG, etc., may not playback.

Reference

DMP-BD80&60EB&EG&EF&GN-RQT9401_eng.book 39 ページ２００９年２月６日　金曜日　午後５時２２分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic DMPBD80 Seite 39

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic DMPBD80

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info