Bedienungsanleitung Panasonic DMPBD80 (Seite 41 von 48) (Englisch)

602973

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

RQT9401

Network Page

Other difficulties with playback

When other Panasonic products respond to this remote control

Change the remote control code on the main unit and the remote control (the two must match) if you place other Panasonic products close

together.

I can’t connect to the network. ≥Has the LAN cable come unplugged? Check that the LAN cable is properly connected.

≥Have you plugged in a modular cable for use with a telephone into the LAN terminal on this

unit? Connect with a straight LAN cable.

≥Is the power for the modem or broadband router turned on? Turn the power on for each

device.

≥Is there a mistake in the network settings? Follow any instructions you may have received

from your ISP (Internet Service Provider) and make changes to the settings.

≥Are the broadband router settings correct? Read the operating instructions for the broadband

router.

≥Is the broadband router and/or modem correctly connected? Check the operating

instructions for each device and connect accordingly.

≥Check the “Network Settings” and “BD-Live Internet Access” settings.

—

29, 32

While using my PC, I cannot

connect to the network.

≥Does your Internet Service Provider (ISP) or service contract prevent multiple terminals

connecting at the same time? Check the content of your contract.

—

VIERA CAST does not operate

or connect.

≥Is the network connection correct?

≥Image of the video contents may be disturbed or may not display depending on how busy the

environment or the connected line is.

—

Audio and video momentarily

pause.

≥This occurs between playlist chapters or scenes ([AVCHD]).

≥When playing a title recorded on both layers, the unit automatically switches between layers

and plays the title in the same way as a normal program. However, video and audio may

momentarily cut out when the unit is switching layers.

—

BD-Video or DVD-Video is not

played.

≥Ensure the disc is for the correct BD-Video region code or DVD-Video region number, and is

not defective.

≥You have set a ratings level to limit BD-Video or DVD-Video play. Change this setting.

≥Some BD-Video can only be output with HDMI.

Cover

—

Picture-in-picture is not played

with BD-Video.

≥Confirm whether the disc supports picture-in-picture.

—

The BD-Live is not played with

BD-Video.

≥Confirm whether the disc supports the BD-Live.

≥The inserted SD card does not have sufficient available capacity.

≥The SD card is write-protected.

≥Sub contents copied to an SD card are provided by the disc producer as a part of the

BD-Video content. Even if you record images and audio onto an SD card, it cannot be played

as a BD-Live.

—

Alternative soundtrack and

subtitles cannot be selected.

≥The languages are not recorded on the disc.

≥You may not be able to use the on-screen menu to change the soundtrack and subtitles on

some discs. Use the disc’s menus to make changes.

—

No subtitles. ≥Subtitles are not recorded on the disc.

≥Turn the subtitles on. Set “Subtitle” on the on-screen menu to “On”.

—

Angle cannot be changed. ≥Angles can only be changed during scenes where different angles are recorded. —

The resume play function does

not work.

≥Memorized positions are canceled when

– pressing [∫] several times.

– opening the disc tray.

≥The resume play function may not work depending on the disc.

≥[BD-V]: On BD-Video discs including BD-J, the resume play function does not work.

—

1 Press [SETUP].

2 Press [3, 4] to select “General” and press [OK].

3 Press [3, 4] to select “Remote Control” and

press [OK].

4 Press [3, 4] to select the code (1, 2, or 3) and

press [OK].

To change the code on the remote control

While pressing [OK], press and hold the

numbered button ([1], [2] or [3]) for more than

5 seconds.

6 Press [OK].

When the following indicator

appears on the unit’s display and

you are unable to operate the unit

The unit’s remote control code

Press and hold [OK] and the

indicated number button at the same

time for more than 5 seconds.

Set Code 1

Set Code 2

Set Code 3

Remote Control

Press

[



]

and

[

]

together

for more than 5 seconds on

the remote.

NOTE

Reference

DMP-BD80&60EB&EG&EF&GN-RQT9401_eng.book 41 ページ２００９年２月６日　金曜日　午後５時２２分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic DMPBD80 Seite 41

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic DMPBD80

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info