Bedienungsanleitung Panasonic DMR-HS2 (Seite 62 von 76) (Englisch)

623120

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

Advanced operation

Changing the unit’s settings

RQT6570

See page 60 for menu and option details.

1 While stopped

Press [SET UP] to show the menus.

2 Press [3, 4] to select the menu’s tab

and press [1].

3 Press [3, 4] to select the menu and

press [ENTER].

4 Press [3, 4] to select the option and

press [ENTER].

The screen now shows the menu again.

≥Some items require different operations. Read the following

explanations.

To return to the previous screen

Press [RETURN].

When you are finished

Press [SET UP].

[DVD-V]

The password screen is shown when you select levels 0 to 7.

1. Input a 4-digit password with the numbered buttons.

≥If you enter a wrong number, press [CANCEL] to erase it.

2. Press [ENTER].

≥The lock symbol appears closed to show the rating is locked.

≥Do not forget your password.

3. Press [ENTER] to confirm the 4 digits.

[DVD-V]

Change the settings when you have connected equipment through

this unit’s DIGITAL AUDIO OUT terminal (➜page 57, [A]).

Select the “Audio” tab and then “Digital Audio Output” by

following “Common procedures” (➜ left) to set up “PCM Down

Conversion”, “Dolby Digital” and “DTS”.

Select how to output audio with a sampling frequency of 96 kHz.

Select “On” if the equipment you connect cannot process signals

with a sampling frequency of 96 kHz.

≥Select “Off” if you use analog connect irrespective of the type of

equipment.

Off (Factory preset):

Output as 96 kHz. There is no output if the disc has copy protection.

Select “On” in this case.

On:

Converted to 48 kHz for output.

Bitstream (Factory preset for Dolby Digital):

Select if the equipment you connected can decode the signal.

PCM:

Select if the equipment you connected cannot decode Dolby Digital

signal.

Off (Factory preset for DTS):

Select if the equipment you connected cannot decode DTS signal.

IMPORTANT

If the equipment you connected cannot decode the signal, the

setting must be changed to PCM or Off. If not, signals the

equipment cannot process will be output by this unit, causing

high levels of noise which can damage your hearing and the

speakers.

Common procedures

DVD

VCR Plus+ TV/VIDEO

REC MODE

REC

VOLUME

DVD

123

789

100

SLOW/SEARCH

DIRECT NAVIGATOR

TOP

RETURN

FUNCTIONS

PROG/CHECK

DISPLAY

TIME SLIP

ADD/DLT

ENTER

PLAY LIST

CANCEL

POWER

ÍÍ

OPEN/CLOSE

SET UP

ERASE

DUBBING

POSITION MEMORY

MARKER

AUDIO

INPUT SELECT

CM SKIP

STATUS

SKIP

HDD

DVD

3, 4, 2, 1

ENTER

SET UP

RETURN

SET UP

CANCEL

Numbered

buttons

Tab

SELECT

Antenna System

Auto Channel Setting

Channel Caption

Preset Channel Caption

Manual Channel Caption

VCR Plusi CH Setting

CATV

SET UP

RETURN

Set Up

Disc

Video

Audio

Display

TV Screen

OptionsMenusTabs

Channel

Entering a password (Ratings)

If you insert a DVD-Video that exceeds the ratings limit you set, a

message appears on the television.

Follow the on-screen instructions.

Digital Audio Output

PCM Down Conversion

Dolby Digital and DTS

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic DMR-HS2 Seite 62

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic DMR-HS2

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info