Bedienungsanleitung Panasonic EY 6432 (Seite 7 von 59) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

78273

Zoom out

Zoom in

Vorherige Seite

1/59

Nächste Seite

— 7 —

III. OPERATION

Switch and Forward / Reverse

lever Operation

(Forward ( ), Switch lock, Reverse ( ))

CAUTION: Do not operate Forward/Reverse

lever until the chuck comes to a com-

plete stop. Shifting during rotation of

the chuck may damage the tool.

Forward Rotation Switch Operation

1. For forward rotation, set the lever to forward.

2. Depress the trigger switch slightly to start the

tool slowly.

3. The speed increases with the amount of

depression of the trigger for efficient tightening

of screws and drilling. The brake operates and

the chuck stops immediately when the trigger

is released.

4. After use, set the lever to its center position

(switch lock).

Reverse Rotation Switch Operation

1. For reverse rotation, set the lever to reverse.

Check the direction of rotation before use.

2. Depress the trigger switch slightly to start the

tool slowly.

3. After use, set the lever to its center position

(switch lock).

Speed Selection

Choose a low or high speed to suit the use.

CAUTION: Check the speed selector switch

before use.

Clutch Torque Setting

Adjust the torque to one of the 18 possible set-

tings or “ ” position to the job.

CAUTION: Test the setting before actual opera-

tion. Set the scale at this mark ( ).

(Fig. 7)

Note: When the brake operates, a braking sound

may be heard.

This sound indicates engagement of the bit

lock.

CAUTION: • To eliminate excessive tempera-

ture increase of the tool surface,

do not operate the tool continu-

ously using two or more battery

packs.

Tool needs cool off time before

switching to another pack.

• Do not close up vent holes on

body sides of the body during

operation.

Otherwise, the machine function is

adversely affected to cause a fail-

ure

• Do NOT strain the tool(motor).

This may cause damage to the

unit.

• Use the machine in such a way as

to prevent the air from the body

vent holes from blowing directly

onto your skin. Otherwise, you

may get burnt.

• When operating with a Ni-MH bat-

tery pack, make sure the place is

well-ventilated.

For Appropriate use of Battery pack

Ni-MH Battery pack (EY9200/EY9201/

EY9230/EY9231)

• Charge the Ni-MH battery fully before storage

in order to ensure a longer service life.

• The ambient temperature range is between

0°C (32°F) and 40°C (104°F).If the battery

pack is used when the battery temperature is

below 0°C (32°F), the tool may fail to function

properly. In that case, charge the bat¦tery until

charging is completed for appropriate function-

ing of the battery.

• When battery pack is not in use, keep it away

from other metal objects like: paper clips,

coins, keys, nails, screws, or other small metal

objects that can make a connection from one

terminal to another.

Shorting the battery terminals together may

cause sparks, burns or a fire.

• When operating with a Ni-MH battery pack,

make sure the place is well-ventilated.

Ni-Cd Battery pack

(EY9106/EY9136)

• Nickel cadmium battery pack requires a

“BREAK-IN PERIOD” to reach maximum oper-

ating capacity. The “BREAK-IN PERIOD” is

accomplished during normal usage during the

first 6-8 charge and discharge cycles of the

battery pack.

After the “BREAK-IN PERIOD” is completed,

the battery pack will maintain maximum operat-

ing capacity throughout the normal life of the

battery pack.

Battery Pack Life

The rechargeable batteries have a limited life. If the

operation time becomes extremely short after

recharging, replace the battery pack with a new one.

Note: Use under extremely hot or cold conditions

will reduce operating capacity per charge.

EY6405(EU).book Page 7 Wednesday, June 15, 2005 7:14 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic EY 6432 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info