Bedienungsanleitung Panasonic EY45A2 (Seite 17 von 176) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

568605

Zoom out

Zoom in

Vorherige Seite

1/176

Nächste Seite

[Battery Pack]

For Appropriate Use of

Bat tery Pack

Li-ion Battery Pack

• For optimum battery life, store the Li-ion bat-

tery pack following use without charging it.

• When charging the battery pack, confirm

that the terminals on the battery charger

are free of foreign substances such as dust

and water etc. Clean the terminals before

charging the battery pack if any foreign sub-

stances are found on the terminals.

The life of the battery pack terminals may be

affected by foreign substances such as dust

and water etc. during operation.

• When battery pack is not in use, keep it away

from other metal objects like: paper clips,

coins, keys, nails, screws, or other small metal

objects that can make a connection from one

terminal to another.

Shorting the battery terminals together may

cause sparks, burns or a fire.

• When operating the battery pack, make sure

the work place is well ventilated.

• When the battery pack is removed from the

main body of the tool, replace the battery

pack cover immediately in order to prevent

dust or dirt from contaminating the battery ter-

minals and causing a short circuit.

Battery Pack Life

The rechargeable batteries have a limited life. If

the operation time becomes extremely short after

recharging, replace the battery pack with a new

one.

Battery Recycling

ATTENTION:

For environmental protection and recycling of

materials, be sure that it is disposed of at an

officially assigned location, if there is one in your

country.

Recommendations for use

Pack cover

Terminals

Label

Be sure to use the Pack cover

• When the battery pack is not being used, store

the battery in a way that foreign substances

such as dust and water etc. do not contami-

nate the terminals. Be sure to attach the bat-

tery pack cover to protect the battery terminals.

• When charging the battery pack, confirm that

the terminals on the battery charger are free of

foreign substances such as dust and water etc.

Clean the terminals before charging the battery

pack if any foreign substances are found on

the terminals.

The life of the battery pack terminals may be

affected by foreign substances such as dust

and water etc. during operation.

CAUTION:

To protect the motor or battery, be sure to note

the following when carrying out operation.

• If the battery becomes hot, the protection func-

tion will be activated and the battery will stop

operating.

The overheat warning lamp on the control

panel illuminates or flashes when this feature

is active.

For safe use

• The battery pack is designed to be installed by

proceeding two steps for safety. Make sure the

battery pack is installed properly to the main

unit before use.

• If the battery pack is not connected firmly when

the switch is switched on, the overheat warn-

ing lamp and the battery low warning lamp will

flash to indicate that safe operation is not pos-

sible, and the main unit will not rotate normal-

ly. Connect the battery pack into the unit of the

tool until the red or yellow label disappears.

EY45A2(EU).indb 17 2014-1-15 10:13:12

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic EY45A2 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info