Menu list
Problem Cause/solution
The display is in a language I
c
annot read.
R Change the display language (page 14).
I cannot register a handset to a
h
ub.
R The maximum number of handsets (6) is already
registered to the hub. Cancel unused handset
registrations from the hub (page 31).
R You entered the wrong hub PIN. If you forget your PIN,
see “I cannot remember the hub PIN.” (page 49).
I c
annot remember the hub PIN. R Change the hub PIN using the following method.
1 M
N#132
2 *
7000
3 Enter the new 4-digit hub PIN. a MOKN
4 MbN: “Yes” a MOKN a MeN
Battery recharge
Problem Cause/solution
The handset beeps and/or
blinks.
R B
attery charge is low. Fully charge the batteries (page 11).
I fully charged the batteries, but
–
still blinks,
–
the operating time seems to
be shorter.
R C
lean the battery ends (
, ) and the charge contacts
w
ith a dry cloth and charge again.
R It is time to replace the batteries (page 11).
Making/answering calls, intercom
Problem Cause/solution
is displayed.
R T
he handset is too far from the hub. Move closer.
R The hub’s AC adaptor is not properly connected.
Reconnect AC adaptor to the hub.
R The handset is not registered to the hub. Register it
(page 31).
Noise is heard, sound cuts in
a
nd out.
R You are using the handset or hub in an area with high
electrical interference. Re-position the hub and use the
handset away from sources of interference.
R Move closer to the hub.
R If you use a DSL/ADSL service, we recommend
connecting a DSL/ADSL filter between the hub and the
telephone line jack. Contact your DSL/ADSL provider for
details.
Sound quality seems to be
g
etting worse.
R You have registered a handset that is not recommended
(page 4). The clearest sound quality is only possible by
registering the recommended handset.
Helpline Tel. No.: U.K. 0330 3331112 Ireland 01 4475228
49
Useful Information
