Bedienungsanleitung Panasonic KX-TG273SK (Seite 18 von 88) (Englisch)

588633

Zoom out

Zoom in

Vorherige Seite

1/88

Nächste Seite

Link to cell feature

To use this feature, you must first register and

connect your cellular phones to the base unit

(page 18).

Your cellular phones must have Bluetooth

wireless technology that is compatible with this

product.

This feature allows you to:

– make or answer cellular calls using your

home phone (handset or base unit) with

better reception.

– maximize the benefits of cellular services

(such as free night and weekend calls, or

cellular to cellular call plans) by utilizing

unused peak minutes with your home

phone.

– conserve the battery power of your cellular

phone while the unit is on a cellular call.

(We recommend charging your cellular

phone during the cellular call as your

cellular phone battery is being consumed.)

Important:

R Up to 2 cellular phones can be registered.

However, only one Bluetooth device

(cellular phone or headset) can be

connected to the base unit at a time.

R Locate your cellular phone near the base

unit. If the cellular phone is too close to the

base unit during a cellular call, you may

hear noise. For best performance, we

recommend placing the cellular phone

between 0.6 m to 3 m (2 feet to 10 feet)

away from the base unit.

Trademarks

R The Bluetooth

word mark and logos are

owned by the Bluetooth SIG, Inc. and any

use of such marks by Panasonic

Corporation is under license. All other

trademarks identified herein are the

property of their respective owners.

Registering a cellular

phone

Important:

R For more details and the list of compatible

cellular phones, please visit our Web site:

http://www.panasonic.com/link2cell

R Before registering a Bluetooth enabled

cellular phone to the base unit:

– we recommend you change the PIN

(page 21).

– make sure that no Bluetooth device such

as a Bluetooth headset is connected to

your cellular phone.

1 Handset:

MMENUN

For CELL 1: #6241

For CELL 2: #6242

R After the CELL 1 or CELL 2 indicator

on the base unit starts flashing red, the

rest of the procedure must be

completed within 5 minutes.

2 Your cellular phone:

While the CELL 1 or CELL 2 indicator is

flashing red, follow the instructions of your

cellular phone to enter the registration

mode.

R Depending on your cellular phone, it

may ask you to enter the base unit PIN

(default: “0000”).

3 Handset:

Wait until a long beep sounds.

R It may take more than 10 seconds to

complete registration.

R When the CELL 1 or CELL 2 indicator

lights green, the cellular phone is

connected to the base unit. You are

ready to make cellular calls.

4 To select which unit receives calls for the

cellular line, press MOKN then continue

from step 3, “Selecting which unit

receives cellular calls”, page 19.

R If not required, go to step 5.

5 MOFFN

Note:

R Make sure that your cellular phone is set to

connect to this product automatically. Refer

to your cellular phone’s operating

instructions.

R Make sure you cancel your cellular phone’s

current registration if you want to register it

to the other line (page 21).

For assistance, please visit http://www.panasonic.com/help

Link to Cell

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic KX-TG273SK Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info