Bedienungsanleitung Panasonic KX-TG273SK (Seite 20 von 88) (Englisch)

588633

Zoom out

Zoom in

Vorherige Seite

1/88

Nächste Seite

Important:

R When you are using a cellular line or a

Bluetooth headset, the base unit loses its

connection from other Bluetooth devices

(cellular phone or headset). To

automatically resume the connection to

cellular phones, leave the auto connection

on.

R Some cellular phones lose connection after

usage, please check the specification of

your cellular phone for more details.

1 MMENUN#632

2 MbN: Select the desired setting.

3 MSAVEN a MOFFN

Note:

R Some cellular phone may ask you if you

accept the connection requirement from the

base unit. In that case, select “Off” in step

2. Check the specification of your cellular

phone.

Connecting/disconnecting the

cellular phone manually

When you make or answer calls with your

cellular phone, we recommend disconnecting

it from the base unit, otherwise received audio

may not be heard on your cellular phone.

You can also manually reconnect the cellular

phone to the base unit without waiting for the

auto connection feature to resume the

connection.

1 MMENUN

2 To connect/disconnect:

For CELL 1: #6251

For CELL 2: #6252

R A long beep sounds.

3 MOFFN

Cellular line only mode (If you do

not use the landline)

If you do not use the landline, we recommend

setting the unit to the cellular line only mode.

1 MMENUN#157

2 To turn on:

MbN: “On” a MSELECTN a

MbN: “Yes” a MSELECTN

To turn off:

MbN: “Off” a MSELECTN

Note:

R Once you set this mode, you can use the

following buttons to make cellular calls:

– for the handset, press M

N or M N

instead of MCELLN (page 22).

– for the base unit, press MSP-PHONEN

instead of the line button (MCELL 1N or

MCELL 2N) set for the cellular line

selection (page 20, 27).

(KX-TG7741 series: page 3)

R Once you set this mode, the following

features cannot be used:

– Landline features (page 38)

– Answering system (page 49)

Messages cannot be received.

– Voice mail features (page 55)

R After this mode is turned on or off, the base

unit reboots.

– Bluetooth connections from cellular

phones or headset are disconnected. If

the auto connection is turned on

(page 19), the cellular phones are

reconnected.

– will be displayed on the handset

momentarily. The handset can be used

once is displayed.

When you use the landline again

Before connecting the telephone line to the

base unit, select “Off” in step 2, “Cellular line

only mode (If you do not use the landline)”,

page 20.

Cellular line selection

This feature determines which cellular line is

selected to make cellular calls when:

– you press MCELLN on the handset.

– you press M

N or M N on the handset

while the cellular line only mode is turned

on.

– you press MSP-PHONEN on the base unit

while the cellular line only mode is turned

on. (KX-TG7741 series: page 3)

For assistance, please visit http://www.panasonic.com/help

Link to Cell

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic KX-TG273SK Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info