619940
16
Zoom out
Zoom in
Vorherige Seite
1/48
Nächste Seite
Making/Answering Calls
16
4 Proceed with the operation for your unit.
Base unit: Lift the corded handset.
Handset: {C}
Note:
L A 3 second pause is inserted each time {R } on
the base unit or l on the handset is pressed.
Repeat as needed to create longer pauses.
Answering calls
Using the base unit =
When a call is being received, the speakerphone
indicator flashes.
1 Lift the corded handset or press {s} when the
unit rings.
2 When you finish talking, place the corded
handset on the cradle. When the
speakerphone is used, press {s}.
Adjusting the base unit ringer volume
While the base unit is ringing for an
incoming call:
Press {^} or {V} repeatedly to select the desired
volume.
Programming the volume beforehand:
1 8 (middle soft key)
2 {V}/{^}: Ringer Setup i M
3 {V}/{^}: Ringer Volume i M
4 {V}/{^}: Select the desired volume.
5 M i {b}
Using the handset Y
When a call is being received, the ringer indicator
flashes.
1 Lift the handset and press {C} or {s} when
the unit rings.
L You can also answer the call by pressing
any dial key from {0} to {9}, {*}, or {#}.
(Any key answer feature)
2 When you finish talking, press {ih} or place
the handset on the charger.
Auto talk
You can answer calls simply by lifting the handset
off the charger. You do not need to press {C}. To
turn this feature on, see page 23.
Adjusting the handset ringer volume
While the handset is ringing for an incoming
call:
Press {^} or {V} repeatedly to select the desired
volume.
Programming the volume beforehand:
1 8 (middle soft key)
2 {V}/{^}: Handset Setup i M
3 {V}/{^}: Ringer Setup i M
4 {V}/{^}: Ringer Volume i M
5 {V}/{^}: Select the desired volume.
6 M i {ih}
Useful features during a call
Hold
This feature allows you to put an outside call on
hold.
1 Press {a} during an outside call.
L If you are using the corded handset, you can
place it on the cradle.
2 To release hold, lift the corded handset or
press {s}.
L A handset user can take the call by pressing
{C}.
Note:
L If a call is kept on hold for more than 9 minutes,
the base unit starts to sound an alarm tone. After
1 additional minute on hold, the call is
disconnected.
L If another phone is connected to the same line,
you can also take the call by lifting its handset.
L While an outside call is on hold, the
speakerphone indicator on the base unit
flashes.
Mute
While mute is turned on, you can hear the other
party, but the other party cannot hear you.
1 Press 1 during conversation.
L 1 flashes.
= Base unit
= Base unit / Y Handset
TG6451_6461FX(e-e).book Page 16 Monday, May 4, 2009 8:55 AM
16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

panasonic-kx-tg6451

Suche zurücksetzen

  • Wie kann ich denn beim 6461g eine gesperrte Telefonnummer wieder entsperren? Eingereicht am 3-8-2020 09:47

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Panasonic KX-TG6451 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info